Scene file setting Scene File | Panasonic GP-US932CUS manual

7. Scene file setting [SCENE FILE]

Registration of details, gamma, hue, etc. as a scene file in accordance with an installation location allows users to employ the registered contents only by pressing the [SCENE] button on the front face of the CCU.

Up to 3 scene files can be registered.

Scene file registration is performed on the "SCENE FILE" screen. When a scene file to be registered on the top screen, "SCENE FILE", in the SETU P menu is selected and the [SEL] button is pressed, the "SCENE FILE" screen appears. The "SCENE FILE" screen consists of 2 pages. The selected scene file number appears beside the screen title.

Scene file number

** SCENE FILE 1 ** P1

DTL MODE	*MANU
RED DTL	OFF
GAMMA	–........+
KNEE	*MANU
BLACK STRETCH OFF
D-RANGE	NORMAL
WHITE CLIP	–........+
RET END
SCENE FILE 1 P
		2
FLARE COMP	OFF
DNR	LOW
MATRIX	*USER
CHROMA GAIN –........+
TOTAL PED	–........+

RET END

[DTL MODE] Specifies the details.

The band and level of the edge correction are specified.

"SCENE FILE" screen

** SCENE FILE 1 ** P1

DTL MODE		*MANU
RED DTL		OFF
GAMMA	–........+
KNEE	*MANU
BLACK STRETCH OFF
D-RANGE		NORMAL
WHITE CLIP	–........+

RET END

"DTL MODE" screen

** DTL	MODE **
PATTERN
	USER
DTL BAND	—. . . . +
DTL LEVEL	—........+
RET END

z Move the cursor to "DTL MODE" on the "SCENE FILE" screen and press the [SEL] button.

→The "DTL MODE" screen appears.

xMove the cursor to “PATTERN”, select a pattern from among “1”, “2” and “3”, and press the [SEL] button.

→The settings of “DTL BAND” and “DTL LEVEL” are applied to “USER”.

The band and level can be manually adjusted in “USER”. Perform adjustment on an as-needed basis. Be sure to view the monitor when the adjustment is per- formed.

Note:

•The band and level can also be adjusted directly with- out applying any of the patterns, “1”, “2”, and “3” to “USER”.

c Move the cursor to "DTL BAND" and adjust the band with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the edge becomes thinner (band becomes higher). When the level indicator moves in the "–" direction, the edge becomes thicker (band becomes lower).

v Move the cursor to "DTL LEVEL" and adjust the level with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the image becomes sharper. When the level indicator moves in the "–" direction, the image becomes softer.

Note:

•Jaggies may appear on the edge of a photographic subject, but this phenomenon is not abnormal. If this phenomenon is not favorable, decrease “DTL BAND” or “DTL LEVEL” to adjust the image quality.

[RED DTL] Adjusts the enhancement of red edge.

The red edge enhancement level of images through the camera is adjusted.

The enhancement level is selectable from the following. OFF (default): No edge enhancement is performed on the

red portion.

LOW: The low level of edge enhancement is performed on the red portion.

HIGH: The high level of edge enhancement is performed on the red portion.

[GAMMA] Performs gamma adjustment.

Be sure to view a waveform monitor or a color video monitor when the gamma adjustment is performed.

Move the cursor to "GAMMA" and adjust the gamma level with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the cor- rection level becomes larger. When the level indicator moves in the "–" direction, the correction level becomes smaller.

Moving the cursor to the far end of the “+” direction sets the gamma correction to OFF.