Panasonic WV-CP280, WV-CP284 operating instructions Specifications, Standard Accessories

Specifications

Power source and
power consumption:	WV-CP280: 120 V AC 60 Hz, 3.4 W
	WV-CP284: 24 V AC 60 Hz, 2.7 W, 12 V DC, 220 mA
Image sensor:	1/3 inch interline transfer CCD
Effective pixels:	768 (H) x 494 (V)
Scanning area:	4.9 mm (H) x 3.7 mm (V)
Scanning system:	2 : 1 interlace
Scanning frequency:	Horizontal: 15.734 kHz
	Vertical: 59.94 Hz
Scanning:	525 lines/60 fields/30 frames
Synchronization:	Internal (INT), multiplexed vertical drive (VD2) or line-lock (LL)
Resolution:	Horizontal: 540 TV lines (at center)
	Vertical: 350 TV lines (at center)
Minimum illumination:	0.8 lx {0.08 foot-candle} at F1.4, 0.6 lx {0.06 foot-candle} at F1.2
Signal-to-noise ratio:	50 dB (equivalent to AGC Off, weight On)
Video output:	1.0 V[P-P] NTSC composite 75 Ω (BNC)
Lens mount:	CS-mount
White balance:	ATW
Light control mode setting:	ALC/ELC
Switch function:	Light control mode selector (ALC/ELC), Backlight compensation
	selector (ON/OFF), Adaptive Black Stretch selector (ON/OFF),
	Simple day/night mode selector (ON/OFF), Synchronization mode
	selector (INT/LL)
Ambient temperature:	–10 °C - +50 °C {14 °F - 122 °F}
Ambient humidity:	Less than 90 %
Dimensions:	67 (W) x 65 (H) x 139.5 (D) mm
	{2-5/8"(W) x 2-9/16"(H) x 5-1/2"(D)}
	(excluding the lens connector)
Weight:	WV-CP280: 510 g {1.12 lbs.}
	WV-CP284: 350 g {0.77 lbs.}

Weights and dimensions indicated are approximate.

Standard Accessories

Operating Instructions (this book)	1 pc.
Warranty card	1 pc.

15