•Simple day/night mode selector [D/N] ON: The camera selects
mode if the picture is dark, or color mode if the picture is bright enough.
OFF: Color picture is displayed normally.
Default setting: OFF
Note:
•The simple day/night function is established by utilizing the sense up function for B/W images. The IR filter is secured.
•Adaptive Black Stretch Selector [B.S.] ON: The dark area of the object is auto- matically corrected to lighten it.
OFF: Does not compensate.
Default setting: ON
Important:
•In the case of "ON" setting, noise may be increased in the dark area of the object.
In addition, darkness and brightness may be emphasized in the vicinity of the boundary between the dark and bright areas.
•Backlight compensation selector [BLC]
ON: Compensates the background auto- matically if it is brighter than the object.
OFF: This mode is used when the front of the object is extremely bright.
Default setting: OFF
Note:
•Under conditions such as extremely strong backlight, the desired com- pensation effect may not be achieved even with this mode set to ON to detect the backlight level.
•Light control mode selector [ALC/ELC] ALC: Adjusts the lens iris automatically. ELC: Select this mode when a fixed iris
lens or manual iris lens is used with this camera.
Default setting: ALC
•Synchronization mode selector [INT/LL]
Selects the camera synchronization mode as either internal sync mode (INT) or
INT: Sets to internal 2:1 interlace
LL:Sets to
10