Axis Communications 211W manual Configure the wireless connection using a network cable

Page 10

Page 10

AXIS 211W Installation Guide

Configure the wireless connection using a network cable

Once the AXIS 211W has been connected to your network, the wireless settings can be configured. The fastest, most secure method to configure AXIS 211W is using a wired connection, since it disables the wireless connection and ensures greater secrecy while entering settings. The AXIS 211W automatically searches for available network connections, and allows only one of these to be active at a time. Configuring the AXIS 211W using an unsecured wireless connection is not recommended, since passphrases and keys saved will be sent in plain text.

Open the wireless settings from Setup > Basic Configuration > Wireless.

Note: For even greater security use HTTPS. Go to Setup > System Options > Security > HTTPS and refer to the camera’s online help.

Status of Wireless Networks

This list is the result of a network scan. Access points with a disabled SSID Broadcast will not appear unless the camera is linked to it. The network the AXIS 211W is currently linked to is shown in blue. A network using unsupported security is shown in grey. The following information is provided:

•SSID - The name of a wireless network (or ad-hoc device). If the same name occurs several times this means that several access points for that network were found. The AXIS 211W cannot be configured to be linked to only one particular access point.

•Mode - An Access Point (Master) or Ad-Hoc device.

•Security - Shows which type of security the network uses. See below for the supported security types.

•Channel - Shows the wireless channel currently in use.

•Signal strength - Shows the signal strength.

•Bit rate - The current bit rate in Mbit/s. This is only shown for the access point currently in use.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Axis 211W Page Installation steps Package contentsHardware overview DimensionsUnderside Rear panel Install the hardware Connect the cables and antennaAssign an IP address Method Recommended forAutomatic discovery Axis IP Utility single camera/small installationAssign the IP address manually optional Assign an IP address in a single device Axis Camera Management multiple cameras/large installationsAssign IP addresses in multiple devices Set the password Configure the wireless connection using a network cable Status of Wireless NetworksSecurity Wireless SettingsWPA-/WPA2-Enterprise EAP-TLS EAP-PEAP/MSCHAPv2Complete the wireless installation using a network cable Adjust the image and focus Accessing the Axis 211W from the InternetOther methods of setting the IP address Set the IP address with ARP/PingSpecifications Unit connectorsFunction Connection diagram LED indicatorsColor Indication Further information Resetting to the Factory Default SettingsTip Contenu de lemballage Étapes de linstallationArticle Modèles/variantes/remarques Présentation du matériel Vue de dessous Face arrièreInstallation du matériel Connexion des câbles et de lantenneMéthode Recommandée pour Système Dexploitation Attribution dune adresse IPDétection automatique Axis IP Utility Une seule caméra/petite installationDéfinissez manuellement ladresse IP optionnel Attribuer une adresse IP à un seul dispositif Attribuer des adresses IP à plusieurs dispositifszDéfinition du mot de passe État des réseaux sans fil Paramètres sans fil SécuritéAuthentification sélectionnez Fin de linstallation sans fil à laide dun câble réseau Débranchez le câble réseau de la caméraRéglage de limage et de la mise au point Accès à lappareil Axis 211W à partir dInternetAutres méthodes de définition de ladresse IP Définition de ladresse IP à laide dARP/PingConnecteurs de lunité Fonction Numéro Remarques Spécifications De brocheTémoins DEL Diagramme de connexionCouleur Indication Plus dinformations Rétablissement des paramètres dusine par défautConseil Lieferumfang InstallationsschritteKomponente Modelle/Varianten/Anmerkungen Unterseite Rückseite HardwareübersichtAbmessungen Hardware installieren Kabel und Antenne anschließenIP-Adresse festlegen Methode Empfohlen für BetriebssystemAutomatische Erkennung Axis IP Utility Einzelne Kamera/kleine InstallationIP-Adresse manuell zuweisen optional IP-Adressen mehreren Geräten zuweisen Axis Camera Management Mehrere Kameras/große InstallationEine IP-Adresse einem einzelnen Gerät zuweisen Kennwort festlegen Configuration Wireless Status der DrahtlosnetzwerkeDrahtloseinstellungen SicherheitWEP Axis 211W Installationsanleitung Bild und Fokus einstellen Internetzugriff auf die Axis 211WWeitere Methoden zum Festlegen der IP-Adresse IP-Adresse per ARP/Ping festlegenKameraanschlüsse Funktion Pinnummer Hinweise Technische DatenAnschlussschaltbild LED-AnzeigenFarbe Bedeutung Weitere Informationen Auf werkseitige Voreinstellungen zurücksetzenTipp Importante Procedura di installazioneContenuto della confezione Articolo Modello/varianti/notePanoramica dellhardware DimensioniEtichetta lato inferiore Installazione dellhardware Collegamento dei cavi e dellantennaImpostazione di un indirizzo IP Metodo Consigliato per…Rilevamento automatico Axis IP Utility videocamera singola/piccole installazioniAssegnazione manuale dellindirizzo IP facoltativo Assegnazione degli indirizzi IP in più videocamere Axis Camera Management più videocamere/grandi installazioniAssegnazione di un indirizzo IP in una singola videocamera Selezionare Assign the following IP addressImpostazione della password Stato delle reti wireless Impostazioni wireless ProtezioneEapol version Versione Guida allinstallazione di Axis 211W Accesso al dispositivo Axis 211W da Internet Regolamento dellimmagine e della messa a fuocoSistema operativo UPnP Altri metodi di impostazione dellindirizzo IPImpostazione dellindirizzo IP con ARP/Ping Pagine diConnettori Funzione Numero Specifiche PinSchema delle connessioni Indicatori LEDColore Indicazione Ulteriori informazioni Ripristino delle impostazioni di fabbricaSuggerimento Contenido del paquete Pasos de instalaciónArtículo Modelos/variantes/notas Panel posterior DimensionesPresentación del hardware Parte inferiorInstalación del hardware Conexión de los cables y la antenaConfiguración de una dirección IP Método Recomendado paraDetección automática Asignación manual de la dirección IP opcionalAsignación de direcciones IP en varios dispositivos Asignación de una dirección IP en un dispositivo individualSeleccione Assign the following IP address Configuración de la contraseña Configuración de la conexión inalámbrica con un cable de red Estado de las redes inalámbricasValores inalámbricos SeguridadEAP-TLS Eapol version VersiónFinalización de la conexión inalámbrica con un cable de red Ajuste de la imagen y el enfoque Acceso a la Axis 211W desde InternetOtros métodos para configurar la dirección IP Configuración de la dirección IP con ARP/PingConectores Función Número de Notas Especificaciones PinIndicadores LED Diagrama de conexionesColor Indicación Más información Restablecimiento de los valores inicialesSugerencia Page Axis 211W Installation Guide

211W specifications

Axis Communications, a pioneer in network video surveillance, has consistently delivered high-performance products that cater to a range of security needs. Among its notable offerings is the Axis 211W, a network camera designed for versatility and ease of use, making it an ideal choice for various surveillance applications.

One of the standout features of the Axis 211W is its exceptional image quality. This camera supports resolutions up to 640x480 pixels, ensuring clear and detailed video footage. The camera employs progressive scan technology, which provides smoother images of moving objects compared to traditional interlaced scanning. This capability is essential for monitoring dynamic environments, such as retail spaces or busy public areas.

The Axis 211W is equipped with a built-in microphone, allowing for audio surveillance along with video monitoring. This feature enhances situational awareness and can provide crucial evidence in security incidents. Additionally, the camera supports two-way audio, enabling users to communicate directly through the camera, a feature that can be particularly useful for remote engagement in security operations.

Another significant characteristic of the Axis 211W is its wireless capabilities. With built-in Wi-Fi support, it allows for flexible installation without the constraints of wired connections. This feature is beneficial in locations where running cables would be challenging or impractical. Furthermore, the camera adheres to the 802.11g wireless standard, ensuring stable connectivity for real-time monitoring.

The Axis 211W also comes equipped with advanced motion detection capabilities. Users can configure the camera to send alerts via email or trigger recording when movement is detected within its field of view. This feature helps in minimizing storage use while ensuring critical events are captured.

In terms of usability, the Axis 211W features a user-friendly web interface that simplifies the configuration and management of the camera. This allows for easy adjustment of settings, installation of firmware updates, and integration with various video management software solutions.

Overall, the Axis 211W embodies Axis Communications' commitment to quality, innovation, and security. With its combination of high-resolution imaging, audio capabilities, wireless flexibility, and intelligent features, this network camera represents a robust solution for anyone looking to enhance their security infrastructure. Whether for home use or in commercial environments, the Axis 211W stands out as a reliable tool for effective surveillance.
Top Page Image Contents