Axis Communications 211W manual Wireless Settings, Security, WPA-/WPA2-Enterprise

AXIS 211W Installation Guide Page 11

Wireless Settings

To establish communication, the wireless settings must be the same as in the access point or ad-hoc device. You can select a network by clicking on an access point or ad-hoc device under Status of Wireless Networks, which automatically fills in many of the required fields under Wireless Settings. Keys, passphrases and certificates that are used for security must be entered manually. Contact your Network Administrator for the requirement for the desired access point or ad-hoc device.

SSID - The name of the wireless network you are configuring the camera for. Leave this field blank if you would like the AXIS 211W to attempt to access the nearest unsecured network.

Note: SSID (Service Set Identifier) is sometimes written as ESSID (Extended Service Set Identifier).

Mode - Select Master to access the network via an access point or Ad-hocif you would like to access another wireless device, e.g. a laptop with a wireless connection.

Security

AXIS 211W supports three security methods:

•WPA-/WPA2-PSK

•WPA-/WPA2-Enterprise

•WEP

Depending on the type of security chosen, the proper settings become active.

WPA-/WPA2-PSK

WPA settings - Enter the required Pre-shared Key for the access point, which can be a hexidecimal number or a passphrase

WPA-/WPA2-Enterprise

WPA- Enterprise type - Choose the type of client/server authentication being used by the access point; EAP-TLS or EAP-PEAP/MSCHAPv2.

ENGLISH