Axis Communications user manual Axis 213 PTZ Network Camera

Page 6

6

AXIS 213 PTZ Network Camera

1IR Light - infrared light for night vision. Activated from the AXIS 213 web page.

2Network Indicator - the multi-colored network indicator flashes as follows:

•Amber - flashes for activity on a 10 Mbit/s network

•Green - flashes for activity on a 100 Mbit/s network

•Red - flashes rapid red for hardware error

•None - no connection

3 4 5

1

2

3Network Connector - The AXIS 213 connects to the network via a standard RJ45 connector. Supporting NWAY, the AXIS 213 detects the speed of the local network segment (10BaseT/100BaseTX Ethernet).

4Output/Input Connector - For connection of the connection module cable. See below for information.

5Power Connector - For connection of the PS-K power adaptor (included).

The Reset Button is located on the underside of the unit. This button is used to restore the factory default settings, as described in Resetting to Factory Default Settings, on page 42 or to install the AXIS 213 using AXIS Internet Dynamic DNS Service, on page 13.

The Serial Number is located on the label on the underside of the unit.

Image 6

Contents Axis 213 PTZ Network Camera User’s Manual About This Document Table of contents Checking the Firmware Updating the Firmware Support Product Description Hardware InventoryAxis 213 PTZ Network Camera Optional Accessory Installing the Axis Connecting the HardwareBefore you begin Installing on a Network Axis Media Control AMCManual Installation using Axis IP Utility Manual Installation using ARP and Ping in Windows ExampleManual Installation using ARP and Ping in UNIX/Linux Axis Internet Dynamic DNS Service Installation ProcedureRequirements Using the PTZ Network Camera Accessing the AxisLive View System Options Security Users User List Pan/Tilt/Zoom Control Queue Configuring the PTZ Network Camera Accessing the Setup ToolsOverview of the Setup Tools Video & Image Administrator/OperatorEvent Configuration Administrator/Operator System Options AdministratorUsing the Setup Tools Overlay SettingsVideo & Image Video Stream Overlay Image SettingsGo to Setup Video & Image Overlay Image Overlay image requirementsAdvanced Overlay image limitationsImage Settings AudioImage Offset Axis 213 Configuring the PTZ Network Camera Live View Config Live View Layout Custom SettingsConfigure Own Home User Defined LinksCheck Show Custom Link Html Examples Axis 213 Configuring the PTZ Network Camera PTZ Configuration Preset Positions Sequence ModeLimits PTZ Control Queue on Live View Event Configuration Event ServersTriggered Event How to set up a triggered eventEvent Types Click Add triggered on the Event typesPre-trigger and Post-trigger buffers To expand the web page with the available optionsScheduled Event How to set up a scheduled eventPort Status Click Add scheduled on the Event typesSystem Options SecurityNetwork TCP/IP Settings Date & TimeServices Network UPnP Network SocksNetwork Smtp email Network TrafficMaintenance Ports & devices I/O PortsConfiguration SupportMore Scripting Information Resetting to Factory Default Settings Using the Control ButtonInputs and outputs Installing the audio equipmentConnection Module Video OutSchematic Diagram Connection Module Troubleshooting Checking the FirmwareUpdating the Firmware Support Symptoms, Possible Causes and Remedial Actions Using ARP PingVideo Image Problems Technical Specifications ProtocolsDetail Specification Image Axis 213 Technical Specifications Index Http APIAxis 213 Index Axis 213 User’s Manual Part No