Axis Communications 213 PTZ user manual Manual Installation using ARP and Ping in UNIX/Linux

Page 12

12

Manual Installation using ARP and Ping in UNIX/Linux

Assign your product with a unique IP address from a computer on your network, as follows:

1.Acquire an unused IP address for the AXIS 213 from your network administrator.

2.Connect a standard network cable to your AXIS 213 and connect it to the network.

3.Locate the serial number/MAC Address (S/N) found on the label on the AXIS 213.

Syntax:

arp -s <IP Address> <MAC Address> temp ping -s 408 <IP address>

Example:

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125

4.Connect the power to the AXIS 213.

5.Close the ARP Ping session once ‘Reply from 192.168.0.125: ...’ (or similar) is displayed (approximately 10-15 seconds).

6.Start a Web browser and enter the IP address in the Address/Location field.

7.Press Enter.

8.Enter a password for the root user (administrator).

9.The installation is now complete, proceed to Using the PTZ Network Camera, on page 14.

Image 12

Contents Axis 213 PTZ Network Camera User’s Manual About This Document Table of contents Checking the Firmware Updating the Firmware Support Product Description Hardware InventoryAxis 213 PTZ Network Camera Optional Accessory Installing the Axis Connecting the HardwareBefore you begin Installing on a Network Axis Media Control AMCManual Installation using Axis IP Utility Manual Installation using ARP and Ping in Windows ExampleManual Installation using ARP and Ping in UNIX/Linux Axis Internet Dynamic DNS Service Installation ProcedureRequirements Using the PTZ Network Camera Accessing the AxisLive View System Options Security Users User List Pan/Tilt/Zoom Control Queue Configuring the PTZ Network Camera Accessing the Setup ToolsOverview of the Setup Tools Video & Image Administrator/OperatorEvent Configuration Administrator/Operator System Options AdministratorUsing the Setup Tools Overlay SettingsVideo & Image Overlay Image Settings Go to Setup Video & Image Overlay ImageVideo Stream Overlay image requirementsAdvanced Overlay image limitationsImage Settings AudioImage Offset Axis 213 Configuring the PTZ Network Camera Live View Config Live View Layout Custom SettingsConfigure Own Home User Defined LinksCheck Show Custom Link Html Examples Axis 213 Configuring the PTZ Network Camera PTZ Configuration Preset Positions Sequence ModeLimits PTZ Control Queue on Live View Event Configuration Event ServersHow to set up a triggered event Event TypesTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers To expand the web page with the available optionsHow to set up a scheduled event Port StatusScheduled Event Click Add scheduled on the Event typesSystem Options SecurityNetwork TCP/IP Settings Date & TimeServices Network Socks Network Smtp emailNetwork UPnP Network TrafficMaintenance Ports & devices I/O PortsConfiguration SupportMore Scripting Information Resetting to Factory Default Settings Using the Control ButtonInstalling the audio equipment Connection ModuleInputs and outputs Video OutSchematic Diagram Connection Module Troubleshooting Checking the FirmwareUpdating the Firmware Support Symptoms, Possible Causes and Remedial Actions Using ARP PingVideo Image Problems Technical Specifications ProtocolsDetail Specification Image Axis 213 Technical Specifications Index Http APIAxis 213 Index Axis 213 User’s Manual Part No