Axis Communications 230 MPEG-2 user manual Accessing the Axis 230 from Internet Explorer

Page 14

14

Installing the AXIS 230

AXIS 230

Accessing the AXIS 230 from Internet Explorer

Start your browser and enter the IP address of the AXIS 230 in the location/address field. The first time the camera is accessed, there will be no need to log in.

The Live View page opens, allowing you to proceed with the product’s configuration, by clicking on the Setup link.

Important!

Upon delivery, the AXIS 230 is supplied with one pre-configured Administrator user name and password, set to root and pass, respectively. The Administrator password should be changed as soon as possible, to prevent unauthorized access to the setup tools and/or the video stream.

Configuring audio equipment

The internal microphone or other audio equipment should now be configured:

1.From the setup tools, open the Audio settings page and check the Enable box.

2.Select the input you connected your external equipment to (external line or external mic), or select Internal Microphone. Note that this is the logical connector. All of these options connect via the Audio In connector on the rear panel.

3.Some microphone types require their own (external) voltage supply to operate correctly. These types are condenser microphones and Electret microphones. If using one of these types of microphone, and it is not battery powered, check the box External Mic Power. This option should not be enabled when using a dynamic or battery powered microphone, as this will result in decreased sound quality.

4.Set the desired audio quality, and set the Mic Input Sensitivity according to your microphone. Click Save and then return to the Live View page to check that audio is available. See also the audio settings section on page 20.

Image 14

Contents Axis 230 MPEG-2 Network Camera User’s Manual Axis 230 User’s Manual Table Of Contents Index Glossary of Terms Axis Safety Notice Battery Replacement Safety Notice Battery ReplacementBattery should not be replaced unless required Introduction Axis Features and BenefitsIntroduction Axis Introduction Applications Axis 230 Rear Panel Product DescriptionAxis 230 Front Axis Product DescriptionTitle/Variant Quantity Hardware InventoryProduct Description Axis Manual Installation with ARP and Ping Installing the AxisInstallation using Axis IP Utility Axis Installing the AxisClient System Requirements Axis Media Control Viewing Client Accessing the Axis 230 from Internet Explorer Configuring audio equipmentAxis Operating the Axis Accessing and logging on to the AxisOperating the Axis Live View Access from a browserSetup tools Focus bar Autofocus buttonFocus bar Setup ToolsPositional Control of the Video Source Auto buttonVideo Settings ResolutionAdvanced Settings Audio Settings Live View LayoutConfiguring Event Types Events and Event TypesRespond to Trigger Setting up a new event typeGeneral When Triggered Trigger TypeOperating the Axis Upload Servers Adding an Upload ServerNotification Servers Devices Port Status & DevicesPort Status Operating the Axis Preset position setup Zoom only Preset position setup Pan, Tilt & ZoomAxis System Options Accessing The System OptionsSystem Options Users Administration DescriptionSystem Options Overview System Options AxisEditing and Deleting Users Firewall SettingsAdding Users Adding Allowed IP AddressesNew Server Time Date & TimeCurrent Server Time Dynamic IP Address Notification Settings TCP/IP Network SettingsAutomatic IP Configuration Parameter DescriptionManual IP Configuration Network TrafficSmtp email Network Settings RTP Multicast SettingsCOM Ports RS-232/RS-485 Ports & DevicesIO Ports Maintenance Support Logs & ReportsFactory Default Settings Support Appendix a TroubleshootingChecking the Firmware Server ReportSymptoms Possible causes Remedial actions Symptoms, Possible Causes and Remedial ActionsTroubleshooting Axis Mic or audio input device Pinging Your IP Address Ping Reply Interpretation and recommendationAppendix B Updating the Firmware Update via FTPEmergency Recovery Procedure Axis Updating the FirmwareUpdating the Firmware Axis Modifying the File System Configuration via FTPAppendix C Customizing The Axis Axis Customizing The AxisEditing and Storing Your Web Customizing ProceduresCustom Web Pages Using your own file as a New Home These lines should be added to the file as shown belowOr, if PTZ is enabled Terminal Block D-Sub ConnectorAppendix D Unit Connections Terminal Block PinoutSchematic Diagram Terminal Connector Block Unit Connections AxisBrowser Administration Tools Connecting Pan/Tilt DevicesInstallation Procedure Digital Inputs Controlling and MonitoringTransistor Output Querying the Status of Digital InputsExample Monitor data on inputs 1 Appendix E Audio Settings Audio Settings AxisAppendix F Technical Specifications Axis Technical SpecificationsTechnical Specifications Axis Video Quality vs. Bit Rate Appendix G BandwidthVideo Quality Level Axis BandwidthUnicast Multicast Other ConsiderationsBandwidth Axis Index IndexIndex Axis HttpSmtp Glossary of Terms Glossary of Terms Axis