Axis Communications 230 MPEG-2 user manual Factory Default Settings

Page 38

38

The System Options

AXIS 230

The Factory Default Settings

In certain circumstances, it may be necessary to reinstate the Factory Default settings for your AXIS 230. This is performed in one of two ways:

•By clicking the Restore button from the Maintenance page under System Options. This action will reset most of the unit’s parameters but will save the IP-address, the Subnet mask and the Default Router.

•By pressing the Reset button, located on the rear panel. This option will reset ALL the parameters currently configured in the unit, i.e. network settings, events, etc.

Follow the instructions below to reinstate the product factory default settings using the Reset button:

1.Switch off the AXIS 230 by disconnecting the power supply.

2.Press and hold the Reset button, and reconnect the power.

3.Keep the button pressed until the Status Indicator displays yellow (note that this may take up to 15 seconds), then release the button. When the Status Indicator displays green (which can take up to several minutes) the AXIS 230 will then have been reset to its original factory default settings.

Image 38

Contents Axis 230 MPEG-2 Network Camera User’s Manual Axis 230 User’s Manual Table Of Contents Index Glossary of Terms Axis Safety Notice Battery Replacement Safety Notice Battery ReplacementBattery should not be replaced unless required Introduction Axis Features and BenefitsIntroduction Axis Introduction Applications Axis 230 Rear Panel Product DescriptionAxis 230 Front Axis Product DescriptionTitle/Variant Quantity Hardware InventoryProduct Description Axis Manual Installation with ARP and Ping Installing the AxisInstallation using Axis IP Utility Axis Installing the AxisClient System Requirements Axis Media Control Viewing Client Accessing the Axis 230 from Internet Explorer Configuring audio equipmentAxis Operating the Axis Accessing and logging on to the AxisOperating the Axis Live View Access from a browserSetup tools Focus bar Autofocus buttonFocus bar Setup ToolsPositional Control of the Video Source Auto buttonVideo Settings ResolutionAdvanced Settings Audio Settings Live View LayoutConfiguring Event Types Events and Event TypesRespond to Trigger Setting up a new event typeGeneral When Triggered Trigger TypeOperating the Axis Upload Servers Adding an Upload ServerNotification Servers Devices Port Status & DevicesPort Status Operating the Axis Preset position setup Zoom only Preset position setup Pan, Tilt & ZoomAxis System Options Accessing The System OptionsSystem Options Users Administration DescriptionSystem Options Overview System Options AxisEditing and Deleting Users Firewall SettingsAdding Users Adding Allowed IP AddressesNew Server Time Date & TimeCurrent Server Time Dynamic IP Address Notification Settings TCP/IP Network SettingsAutomatic IP Configuration Parameter DescriptionManual IP Configuration Network TrafficSmtp email Network Settings RTP Multicast SettingsCOM Ports RS-232/RS-485 Ports & DevicesIO Ports Maintenance Support Logs & ReportsFactory Default Settings Support Appendix a TroubleshootingChecking the Firmware Server ReportSymptoms Possible causes Remedial actions Symptoms, Possible Causes and Remedial ActionsTroubleshooting Axis Mic or audio input device Pinging Your IP Address Ping Reply Interpretation and recommendationAppendix B Updating the Firmware Update via FTPEmergency Recovery Procedure Axis Updating the FirmwareUpdating the Firmware Axis Modifying the File System Configuration via FTPAppendix C Customizing The Axis Axis Customizing The AxisEditing and Storing Your Web Customizing ProceduresCustom Web Pages Using your own file as a New Home These lines should be added to the file as shown belowOr, if PTZ is enabled Terminal Block D-Sub ConnectorAppendix D Unit Connections Terminal Block PinoutSchematic Diagram Terminal Connector Block Unit Connections AxisBrowser Administration Tools Connecting Pan/Tilt DevicesInstallation Procedure Digital Inputs Controlling and MonitoringTransistor Output Querying the Status of Digital InputsExample Monitor data on inputs 1 Appendix E Audio Settings Audio Settings AxisAppendix F Technical Specifications Axis Technical SpecificationsTechnical Specifications Axis Video Quality vs. Bit Rate Appendix G BandwidthVideo Quality Level Axis BandwidthUnicast Multicast Other ConsiderationsBandwidth Axis Index IndexIndex Axis HttpSmtp Glossary of Terms Glossary of Terms Axis