AXIS 230 | Technical Specifications | 55 |
Appendix F - Technical Specifications
System Requirements - Windows® 2000 or Windows XP (with latest Service Pack.) AGP graphics card with 16 MB video memory and support for DirectDraw®. Use the latest available driver. Internet Explorer 5.5 or higher (with latest Service Pack.) DirectX® (latest version.)
Installation - Physical network connection using
Management - Remote configuration and status using
Video Features -
Audio In - One 3.5mm input for stereo or mono microphone, or for
Stereo microphone input - High sens.
Stereo microphone input - Low sens.
Line input - Max:+2.7 dBu (3.0 Vpp)
Supported Network protocols - TCP/IP, HTTP, FTP, SMTP, NTP, ARP, DHCP, BOOTP, RTP
Terminal block connector - 2 digital inputs (max 12 V in) and 1 transistor output (max 24 V, 0.1 A). 1 pin for ground. 2 pins for
Pre/Post Alarm Buffer - Approximately 15 MB memory for storage of pre/post alarm video.
Serial Connector - One
Pan/Tilt - Pan/Tilt support via
Security -
Operating Conditions: - Temp: +5o to +50o C (41o to 122o F). Humidity:
Illumination - Min illumination = 0,7 lux (at F1.4 1/60s NTSC or 1/50s PAL) (50IRE) (down to 0.01 lux, depending on shutter speed.) Recommended illumination: 100 to 100.000 lux.