Axis Communications 206 user manual Smtp email, LED Settings

Page 35

AXIS 206 - System Options 34

WEP - Key Type - The key types available depend on the access point being used. The following options are available:

•Manual - Allows you to manually enter the hex key.

•ASCII - In this method the string must be exactly 5 characters for 64-bit WEP and 13 characters for 128-bit WEP.

•Passphrase - The passphrase can contain up to 31 characters. In 64-bit WEP, the Passphrase generates 4 different keys. For 128-bit WEP, only 1 key is generated, which is then replicated for all 4 keys. Key generation is not standardized and can differ from brand to brand. Check that the generated keys are identical to those in your access point - if not they must be entered manually.

WEP - Active Transmit Key - When using WEP encryption, this selects which of the 4 keys the AXIS 206W uses when transmitting.

SMTP (email)

Enter the host names or addresses for your primary and secondary mail servers in the fields provided. This allows the camera to send IP address change notification messages via email.

UPnP™

The AXIS 206 includes support for UPnP™, which is enabled by default. If also enabled on your computer (Windows ME or XP), the camera will automatically be detected and a new icon will be added to “My Network Places.”

Note: UPnP™ must also be enabled on your workstation. To do this, open the Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then select UPnP™ as the service to add.

LED Settings

The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 9, or see the online help.

UPnP™ is a certification mark of the UPnP™ Implementers Corporation.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents User’s Manual About this Document Trademark Acknowledgments Contents Axis 206 About this manual Product Family FeaturesAll models share the following features Axis 206W Additional Features Axis 206M Additional FeaturesFront Rear panel Overview Axis 206/206MFront Overview Axis 206WAxis 206 & Axis 206M LED IndicatorsMounting Install the Axis 206/206MRequirements One-click InstallationAxis Internet Dynamic DNS Service Set the IP addressFollow these instructions UPnPSet the IP address manually Axis IP UtilityAutomatic discovery Windows Syntax Manual Installation with ARP/PingSet up the wireless connection Windows Install the Axis 206WDiscover the IP address for the Axis 206W Set up the Axis 206W on other operating systemsSelect the language and password Access the CameraAccess From a Browser Setup System Options Network TCP/IP Advanced Access from the InternetTo focus FocusingLive View Image and Layout Configuration Video & Image Overview of the Setup toolsBasic Configuration Live View ConfigLanguage Using the Setup toolsImage Settings Action Buttons Live View Config LayoutOverlay Settings Video StreamAMC Axis Media Control Settings Customizing the default Own Home Live View Config Html ExamplesUpload Own Web Files Select your own filesDate & Time System OptionsUsers Button Network Basic TCP/IP SettingsIP Address Configuration DNS Configuration Network Advanced TCP/IP SettingsNAT traversal port mapping Status of Wireless Networks Wireless Settings Axis 206W onlySecurity Wireless SettingsSmtp email LED SettingsSupport MaintenanceConfiguration Using the Control Button Resetting to the Factory Default SettingsSupported Web Browsers Technical SpecificationsApprovals EMC Upgrading the Firmware TroubleshootingChecking the Firmware Recover the Axis 206/AXIS 206M Emergency Recovery ProcedureAxis Support Symptoms, Possible Causes and Remedial ActionsStatus and Network indicator LEDs are flashing red Browser freezes Glossary of Terms Wired LAN Axis 206 Index IndexPort mapping Snapshot button 20 SpecificationsUSB cable connector Users Video stream View size
Top Page Image Contents