Axis Communications 207/207W user manual Focusing, Live View, To focus

Page 11

AXIS 207/207W - Accessing the Camera 11

Focusing

Small dot above the lens assembly.

Raised line on focus ring.

Focus Ring (inner ring)

Status Indicator (outer ring)

To focus:

Open a browser and examine the image. If required, adjust the focus ring until the focus is satisfactory.

Note: Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is set to infinity.

The Live View Page

Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.

To resize the video image, click the View Size buttons: half-size (x1/2), full-size (x1), x2 or x4. Note that this does not change the video image’s resolution, but simply how it is displayed.

The Video Format drop-down list allows the video format on the Live View page to be temporarily changed.

The Output buttons control the output directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout.

Pulse - click this button to activate the output for a defined period of time, e.g. to switch on a light for 20 seconds.

Active/Inactive - click these buttons to manually start and stop a connected device, e.g. switch a light on/off.

Image 11
Contents Axis 207/207W Network Camera User’s Manual About this Document Trademark Acknowledgments Contents Axis 207/207W Key features Product FeaturesOverview Axis 207W LED indicatorsAccess from a browser Accessing the Camera3GPP Compatibility Setting the PasswordAccessing the camera from the Internet To focus FocusingLive View AMC audio controls Video Streams How to stream MPEG-4QuickTime & Real Player MPEG-4 clientsMotion Jpeg Axis Media Control AMCAlternative methods of accessing the video stream Axis Media Control ConfigurationAccessing the Setup tools Image Appearance Video and Image settingsOverlay Settings Low Light Behavior Advanced Camera SettingsVideo Stream TestGeneral Audio SettingsAdvanced MPEG-4 Settings GOV Settings Bit Rate ControlLayout Live View ConfigOwn Home Customizing the defaultUpload Own Web Files Output Buttons Default Video FormatDefault Viewer Action ButtonsHtml Examples AMC SettingsMotion Detection Event ConfigurationWhen Triggered Triggered by Input PortAxis 207/207W Event Configuration Object Size History Sensitivity Motion DetectionPort Status Axis 207/207W Event Configuration ExamplesOperator System OptionsSecurity Date & TimeNetwork Advanced TCP/IP Settings Network Basic TCP/IP SettingsNAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local AddressWAN internet Network Traffic Wireless Axis 207W onlyStatus of Wireless Networks Wireless SettingsSmtp email WPA-PSK Wi-Fi Protected Access Pre-Shared KeyWEP Wired Equivalent Protection Ports & Devices LED SettingsMaintenance UPnPSupport Advanced Resetting to the Factory Default SettingsUsing the Control Button Pinout and Interface I/O Terminal ConnectorTerminal Connectors Axis Upgrading the Firmware TroubleshootingBasic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureBrowser Wireless network from a browserCamera is accessible locally, but not externally Are flashing red rapidly Power indicator is not constantly litCamera is inaccessible Decode only I framesPoor quality snapshot images Problems uploading filesAudio volume too low/high Is enabled under System Options Date & TimeSupported Web Browsers Technical SpecificationsEMC Specification MPEG-4 licensing Axis 207/207W Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Allowed to enterMegapixel See Pixel VOP See VOPAxis 207/207W Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network Numerics IndexWPA-PSK