Axis Communications 207/207W user manual Video Streams, How to stream MPEG-4

Page 13

AXIS 207/207W - Video Streams 13

Video Streams

The AXIS 207/AXIS 207W provides several different image and video stream formats. The type to use depends on your requirements and on the properties of your network.

The Live View page in the AXIS 207/AXIS 207W provides access to MPEG-4 and Motion JPEG video streams, as well as to single JPEG images. Other applications and clients can also access these video streams/images directly, without going via the Live View page.

How to stream MPEG-4

This video compression standard makes good use of bandwidth, and can provide high-quality video streams at less than 1 Mbit/s. Note that the image settings of the MPEG-4 stream are the same for all clients.

Deciding on the combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. The available options in AMC are:

Unicast RTP

This unicast method (RTP over UDP) should be

 

 

your first consideration for live unicast video,

 

 

especially when it is important to always have

 

 

an up-to-date video stream, even if some

Unicasting is used for video-on-demand broad-

 

images are dropped.

casting, so that there is no video traffic on the

 

 

network until a client connects and requests the

RTP over RTSP

This unicast method (RTP tunneled over RTSP) is

stream.

 

useful as it is relatively simple to configure fire-

 

 

 

walls to allow RTSP traffic.

Note: There is a maximum of 10 simultaneous

 

 

RTP over RTSP over

This unicast method can be used to traverse fire-

unicast connections.

HTTP

walls. Firewalls are commonly configured to

 

 

allow the HTTP protocol, thus allowing RTP to be

 

 

tunneled.

 

 

 

 

Multicast RTP

This method (RTP over TCP) should be used for live multicast video. The video stream is always

 

up-to-date, even if some images are dropped.

 

 

Multicasting provides the most efficient usage of bandwidth when there are large numbers of clients

 

viewing simultaneously. A multicast broadcast cannot however, pass a network router unless the

 

router is configured to allow this. It is thus not possible to multicast over e.g. the Internet.

 

Note also that all multicast viewers count as one unicast viewer in the maximum total of 10 simulta-

 

neous connnections.

 

 

 

 

AMC will negotiate with the camera to determine exactly which transport protocol to use in the order listed above. This order can be changed and the options disabled, to suit any specific requirements.

Important!

MPEG-4 is licensed technology. The AXIS 207/AXIS 207W includes one viewing cli- ent license. Installing additional unlicensed copies of the viewing client is prohibited. To purchase additional licenses, contact your Axis reseller.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Axis 207/207W Network Camera User’s Manual About this Document Trademark Acknowledgments Contents Axis 207/207W Key features Product FeaturesOverview Axis 207W LED indicatorsAccess from a browser Accessing the CameraAccessing the camera from the Internet Setting the Password3GPP Compatibility Live View FocusingTo focus AMC audio controls Video Streams How to stream MPEG-4Motion Jpeg MPEG-4 clientsAxis Media Control AMC QuickTime & Real PlayerAlternative methods of accessing the video stream Accessing the Setup tools ConfigurationAxis Media Control Overlay Settings Video and Image settingsImage Appearance Video Stream Advanced Camera SettingsTest Low Light BehaviorAdvanced MPEG-4 Settings GOV Settings Audio SettingsBit Rate Control GeneralLayout Live View ConfigUpload Own Web Files Customizing the defaultOwn Home Default Viewer Default Video FormatAction Buttons Output ButtonsHtml Examples AMC SettingsWhen Triggered Event ConfigurationTriggered by Input Port Motion DetectionAxis 207/207W Event Configuration Object Size History Sensitivity Motion DetectionPort Status Axis 207/207W Event Configuration ExamplesSecurity System OptionsDate & Time OperatorNetwork Advanced TCP/IP Settings Network Basic TCP/IP SettingsHost Name Configuration NTP ConfigurationLink-Local Address NAT traversal port mappingWAN internet Status of Wireless Networks Wireless Axis 207W onlyWireless Settings Network TrafficWEP Wired Equivalent Protection WPA-PSK Wi-Fi Protected Access Pre-Shared KeySmtp email Maintenance LED SettingsUPnP Ports & DevicesSupport Using the Control Button Resetting to the Factory Default SettingsAdvanced Pinout and Interface I/O Terminal ConnectorTerminal Connectors Axis Basic Configuration TroubleshootingChecking the Firmware Upgrading the FirmwareAxis Support Emergency Recovery ProcedureCamera is accessible locally, but not externally Wireless network from a browserBrowser Camera is inaccessible Power indicator is not constantly litDecode only I frames Are flashing red rapidlyAudio volume too low/high Problems uploading filesIs enabled under System Options Date & Time Poor quality snapshot imagesSupported Web Browsers Technical SpecificationsEMC Specification MPEG-4 licensing Axis 207/207W Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Allowed to enterMegapixel See Pixel VOP See VOPAxis 207/207W Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network Numerics IndexWPA-PSK
Top Page Image Contents