Axis Communications 207/207W user manual About this Document

Page 2

About this Document

This manual is intended for administrators and users of the AXIS 207/207W Network Camera, and is applicable for software release 4.30 and later. It includes instructions for using and managing the AXIS 207/207W on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required. See also the product’s online help, available via the Web-based interface.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the product.

Important! - Indicates a hazard that can seriously impair operation.

Do not proceed beyond any of the above notices until you have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.

This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.

This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see http://www.opensource.apple.com/apsl/).

The source code is available from: http://developer.apple.com/darwin/projects/bonjour/

Legal Considerations

Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product includes one (1) MPEG-4 decoder license. To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

Canada - This Class B digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for radiated emission according to limit B of EN55022/1998, and the requirements for immunity according to EN55024/1998 residential, commercial, and light industry.

Japan - This is a class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

Australia - This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS 3548.

Safety

Compies to EN 60950, Safety of Information Technology equipment.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Radio Transmission Regulatory Information (AXIS 207W)

This equipment generates and radiates radio frequency energy, and must be installed and operated while maintaining a minimum body-to-camera distance of 3 feet (1 meter).

Tested to comply with FCC Standards FOR HOME OR OFFICE USE. This product must be installed and used in strict accordance with the instructions given in the user documentation. This Axis product complies with the following radio frequency and safety standards:

Europe - EU Declaration of Conformity. This device complies with the requirements of the R&TTE Directive 1999/5/EC with essential test suites as per standards:

EN 301 489 General EMC requirements for radio equipment, ETS 300 328 Technical requirements for radio equipment.

USA - Federal Communications Commission FCC

This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions:

(1)This device may not cause harmful interference

(2)This device must accept any interference that may cause undesired operation.

Canada - This device complies with RSS-210 of Industry Canada. Operation is subject to the following conditions:

(1)This device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device.

Liability

Every care has been taken in the preparation of this manual. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Image 2
Contents Axis 207/207W Network Camera User’s Manual About this Document Trademark Acknowledgments Contents Axis 207/207W Product Features Key featuresOverview LED indicators Axis 207WAccessing the Camera Access from a browser3GPP Compatibility Setting the PasswordAccessing the camera from the Internet To focus FocusingLive View AMC audio controls How to stream MPEG-4 Video StreamsAxis Media Control AMC MPEG-4 clientsMotion Jpeg QuickTime & Real PlayerAlternative methods of accessing the video stream Axis Media Control ConfigurationAccessing the Setup tools Image Appearance Video and Image settingsOverlay Settings Test Advanced Camera SettingsVideo Stream Low Light BehaviorBit Rate Control Audio SettingsAdvanced MPEG-4 Settings GOV Settings GeneralLive View Config LayoutOwn Home Customizing the defaultUpload Own Web Files Action Buttons Default Video FormatDefault Viewer Output ButtonsAMC Settings Html ExamplesTriggered by Input Port Event ConfigurationWhen Triggered Motion DetectionAxis 207/207W Event Configuration Motion Detection Object Size History SensitivityAxis 207/207W Event Configuration Examples Port StatusDate & Time System OptionsSecurity OperatorNetwork Basic TCP/IP Settings Network Advanced TCP/IP SettingsLink-Local Address NTP ConfigurationHost Name Configuration NAT traversal port mappingWAN internet Wireless Settings Wireless Axis 207W onlyStatus of Wireless Networks Network TrafficSmtp email WPA-PSK Wi-Fi Protected Access Pre-Shared KeyWEP Wired Equivalent Protection UPnP LED SettingsMaintenance Ports & DevicesSupport Advanced Resetting to the Factory Default SettingsUsing the Control Button I/O Terminal Connector Pinout and InterfaceTerminal Connectors Axis Checking the Firmware TroubleshootingBasic Configuration Upgrading the FirmwareEmergency Recovery Procedure Axis SupportBrowser Wireless network from a browserCamera is accessible locally, but not externally Decode only I frames Power indicator is not constantly litCamera is inaccessible Are flashing red rapidlyIs enabled under System Options Date & Time Problems uploading filesAudio volume too low/high Poor quality snapshot imagesTechnical Specifications Supported Web BrowsersEMC Specification MPEG-4 licensing Glossary of Terms Axis 207/207W Glossary of TermsAllowed to enter Half-duplex See Full-duplexVOP See VOP Megapixel See PixelAxis 207/207W Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network Index NumericsWPA-PSK