Axis Communications 207/207W user manual Wireless Axis 207W only, Status of Wireless Networks

Page 32

32AXIS 207/207W - System Options

RTSP

The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP port number to use. The default setting is 554.

Network Traffic

Connection Type - The default setting is Auto-negotiate, which means that the correct speed is automatically selected. If necessary, you can set the connection speed by selecting it from the drop-down list.

For more information, please see the online help.

Wireless (AXIS 207W only)

These settings should always be made in the camera first and secondly in the wireless access point. This ensures that the camera is always accessible when making changes.

Using a wired connection ensures greater secrecy while making these settings.

Status of Wireless Networks

This list is the result of a network scan. Access points with a disabled SSID Broadcast will not appear unless the camera is associated with it. The network currently associated to is shown in blue. A network using unsupported security is shown in grey. The following information is provided:

•SSID - The name of a wireless network (or ad-hoc device). If the same name occurs several times this means that several access points for that network were found. The AXIS 207W cannot be configured to only associate with one particular access point.

•Mode - The Access Point (Master) or Ad-Hoc device.

•Security - Shows which type of security the network uses. See below for the security types supported by the AXIS 207W.

•Channel - Shows the wireless channel currently in use.

•Signal strength - Shows the signal strength.

•Bit rate - Shows the bit rate in Mbit/s. This can only be shown for the access point currently in use. Note that the bit rate shown is the current rate, and that this value may vary over time.

Wireless Settings

These settings control how the AXIS 207W interacts with the wireless network. Apart from identifying the wireless network, it is also possible to enable wireless encryption.

SSID - This is the name of the wireless network the AXIS 207W is configured for. The field accepts up to 32 alphanumeric characters. The name must be exactly the same as that used in the wireless access point, or the connection will not be established.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Axis 207/207W Network Camera User’s Manual About this Document Trademark Acknowledgments Contents Axis 207/207W Product Features Key featuresOverview LED indicators Axis 207WAccessing the Camera Access from a browser3GPP Compatibility Setting the PasswordAccessing the camera from the Internet To focus FocusingLive View AMC audio controls How to stream MPEG-4 Video StreamsMPEG-4 clients Motion JpegAxis Media Control AMC QuickTime & Real PlayerAlternative methods of accessing the video stream Axis Media Control ConfigurationAccessing the Setup tools Image Appearance Video and Image settingsOverlay Settings Advanced Camera Settings Video StreamTest Low Light BehaviorAudio Settings Advanced MPEG-4 Settings GOV SettingsBit Rate Control GeneralLive View Config LayoutOwn Home Customizing the defaultUpload Own Web Files Default Video Format Default ViewerAction Buttons Output ButtonsAMC Settings Html ExamplesEvent Configuration When TriggeredTriggered by Input Port Motion DetectionAxis 207/207W Event Configuration Motion Detection Object Size History SensitivityAxis 207/207W Event Configuration Examples Port StatusSystem Options SecurityDate & Time OperatorNetwork Basic TCP/IP Settings Network Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationLink-Local Address NAT traversal port mappingWAN internet Wireless Axis 207W only Status of Wireless NetworksWireless Settings Network TrafficSmtp email WPA-PSK Wi-Fi Protected Access Pre-Shared KeyWEP Wired Equivalent Protection LED Settings MaintenanceUPnP Ports & DevicesSupport Advanced Resetting to the Factory Default SettingsUsing the Control Button I/O Terminal Connector Pinout and InterfaceTerminal Connectors Axis Troubleshooting Basic ConfigurationChecking the Firmware Upgrading the FirmwareEmergency Recovery Procedure Axis SupportBrowser Wireless network from a browserCamera is accessible locally, but not externally Power indicator is not constantly lit Camera is inaccessibleDecode only I frames Are flashing red rapidlyProblems uploading files Audio volume too low/highIs enabled under System Options Date & Time Poor quality snapshot imagesTechnical Specifications Supported Web BrowsersEMC Specification MPEG-4 licensing Glossary of Terms Axis 207/207W Glossary of TermsAllowed to enter Half-duplex See Full-duplexVOP See VOP Megapixel See PixelAxis 207/207W Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network Index NumericsWPA-PSK
Top Page Image Contents