Samsung SNB-5001, SNB-7001 Auto Network Setup, Enter the password This is the login password for

Auto Network Setup

Run <IP Installer_vX.XX.exe> to display the camera search list.

At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

M For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

1.Select a camera in the search list. Find the MAC (Ethernet) address labeled on the rear of the camera. Both the [Auto Set] and [Manual Set] buttons will be activated.

2.Click [Auto Set].

The Auto Setting dialog appears.

The <IP Address>, <Subnet Mask>, and <Gateway> will be set automatically.

3.Enter the password.

This is the login password for the

“admin” user who accesses the camera. The default password is “4321”.

The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

If you want to change the password, refer to

“Administrator Password Change” of the user setup. (page 63)

4.Click [OK].

Auto network setup will be completed.

● NETWORK CONNECTION AND SETUP

English _27