Samsung SNB-7001, SNB-5001 user manual Motion detection

setup screen

Motion detection

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <Event setup >.

3.Select <Motion detection> from <Event action setup>.

❖Motion Detection

1.Set whether or not to <Enable>.

2.Set the motion detection mode to Mask.

•Detect : Detect a motion that may occur in the selected area.

•Mask : Detect a motion that may occur in other areas than the selected.

3.Select the detection sensitivity of a moving object.

 Set to a lower sensitivity in environments that allow clear distinguishing of objects from background. Set to a higher sensitivity otherwise, such as in a dark place.

4.Use the drag-and-drop method to specify the detection area on the video.

•Mask mode : Display the set area.

•Minimum object size : Set the minimum area for a recognizable object.

Motion detection will not be activated for an area that is smaller than the minimum size of object.

•Maximum object size : Set the maximum area for a recognizable object.

•[Clear ( )] : Cancel the set area.

5.Specify the use of overlay.

- Select <Display event area> to mark a box on the detected moving object on the screen.

6.Specify the activation time and activation condition.

 For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 57)

7.When done, click [Apply ( )].

60_ setup screen