802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install the certification.
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <802.1x>.
3.Set the <IEEE 802.1x Setting(EAPOL using
•Enable IEEE 802.1x : Specify the use of the 802.1x protocol.
•EAPOL Version : Select version 1 or 2.
•ID : Enter the EAPOL ID.
•Password : Enter the EAPOL password.
J If the connected network device does not support the 802.1x protocol, the protocol will not operate properly even if you set it.
4.Install/remove the certificate.
•CA Certificates : Select a public certificate that contains the public key.
•Client Certificate : Select a public certificate that contains the client certificate key.
•Client Private Key : Select a public certificate that contains the client private key.
5.When done, click [Apply ( 
)].
To install/remove 802.1x related certificates
1.Press the [Browse ( 
)] button for each item and select a certificate to install.
2.If no certificate is installed, you will see “Not Available” appearing next to the selected item.
3.Press the [Install ( 
)] button to start installation with a message of “Installed” next to the item.
4.Press the [Delete (
)] button to remove the certificate.
● SETUP SCREEN