Samsung SNB-5001, SNB-7001 Port Range Forward Port Mapping Setup, Manual Port Range Forwarding

PORT RANGE FORWARD (PORT MAPPING) SETUP

If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it.

Manual Port Range Forwarding

1.From the Setup menu of the Broadband Router, select <Applications & Gaming> - <Port Range Forward>. For setting the port range forward for a third-party Broadband Router, refer to the user guide of that Broadband Router.

2.Select <TCP> and <UDP Port> for each connected camera to the Broadband Router.

Each port number for the Broadband Router should match that specified in <Network> - <Port> from the camera's Setup menu.

3.When done, click [Save Settings]. Your settings will be saved.

M Above sample instructions are based on the CISCO’s Broadband Router (Model: LINKSYS).

The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router.

● NETWORK CONNECTION AND SETUP

English _29