Alarm input
You can set the alarm input type, activation time, and operation mode.
1.From the Setup menu, select the
<Event ( 
)> tab.
2.Click <Event setup >.
3.Select <Alarm input> from <Event action setup>.
4.Set whether or not to <Enable>.
5.Specify an input device.
•Type
-Normal open : It is normally open, but if it is closed, an alarm will be triggered.
-Normal close : It is normally closed,
but if it is open, an alarm will be triggered.
6.Specify the <Activation time>.
•Always : Always check if an alarm occurs. It activates in operated mode when the alarm occurs.
If set to Always, the activation time cannot be changed.
•Only scheduled time : Check if an alarm occurs at a specified day of the week for a specified time period. It activates in operated mode when the alarm occurs.
•[Clear ( 
)] : Deselect the selected times.
7.Specify an operation that will perform if an alarm occurs.
•FTP : Specify the use of FTP transfer in the alarm input setup.
•
8.When done, click [Apply ( 
)].
● SETUP SCREEN