Samsung SNB-7001, SNB-5001 user manual Setup screen

setup screen

•Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.

If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.

The greater the Sens-Up factor is, the brighter the screen becomes but it may result in an afterimage or video delay.

Sens-up is limited to x30 in maximum if two or more users of different profiles are accessing at the same time.

•Sens-up limit : Set the work condition to Auto mode in a low contrast scene.

•AGC mode : Select AGC Control mode.

Adjust the gain value of the video (that, in particular, was recorded at a low contrast scene and had a lower brightness level than normal) to control the video brightness.

Special Setup

1.Select <Special>.

2.Select each item and set it properly.

•Day & night : You can switch the mode to adjust the black and white level as well as the colors.

-Color : Always displays the video in colors.

-B/W : Always displays the video in black and white.

-Auto : Displays in color mode during normal daytime and switches to black and white mode in a low contrast scene at night.

If you set the AGC mode to OFF from <Exposure>, the AUTO DAY/NIGHT mode will be disabled accordingly.

•Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes.

•Duration : Specify the time interval of lighting at which the sequence operation is triggered.

•Sharpness mode : Adjust the overall sharpness of the image. If selecting <On>, you can adjust the sharpness of the image.

•Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.

•Gamma : Adjust the contrast of the image.

•Color level : Adjust the color level of the image.

44_ setup screen