Port
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <Port>.
3.Type in each item in the Port menu as necessary.
Neither the port range between 0 and 1023 nor port 3702 is available.
•HTTP port : HTTP port used to access the camera via the web browser.
The default is 80(TCP).
•VNP port : Set a port used to transfer video signals with the Samsung protocols.
•RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
•Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.
•Silverlight policy port : Silverlight is used to permit to acquire a network connection; the default is 943.
The port range of the Viewer is between 4502 and 4534. If the VNP port is with this effective range, the Viewer port should be specified the same as the VNP port.
You cannot change the Viewer/Silverlight policy port of a camera.
4.When done, click [Apply ( 
)].
DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it.
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <DDNS>.
3.Select <DDNS> that you want to use.
4.Type in the DDNS items according to the selected type.
•Samsung DDNS : Select this if you use the DDNS server provided by Samsung Techwin.
● SETUP SCREEN