•Use daylight saving time : If checked, the time will be set one hour before the local time zone for the specified time period.
This option will be displayed only in areas where DST is applied.
•System time setup : Specify the time and date that will be applied to your system.
-Manual : Specify the time manually.
-Synchronize with NTP server : Sync with the time of the specified server address.
-Synchronize with PC viewer : Synchronize the time with the connected PC.
4.When done, click [Apply ( 
)].
J If the time settings differ between camera and PC, selecting <Synchronize with PC viewer> may still have a difference. So it is recommended to specify the same time settings for both camera and PC.
User
1.From the Setup menu, select the
<System ( 
)> tab.
2.Click <User>.
3.Provide the necessary user information.
•Administrator Password Change : Change the password for the administrator.
The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
•Guest setup : If <Guest access> is allowed, the user with the guest account who accesses the web viewer can view only the Live viewer screen.
The ID/password for the guest account is guest/guest, which cannot be changed.
•Current users : You can change the user information and adjust the permission level for a user who is set to <Enable>.
- Video : You can select a video profile in the Liver viewer screen.
-
- Controls : You can control the camera menu buttons.
4.When done, click [Apply ( 
)].
● SETUP SCREEN