Samsung SNB-3002 user manual Time schedule

setup screen

-An object hides other objects behind.

-Two or more objects overlap or one object divides in multiple portions.

-Too fast object (for a proper detection, one object should be found overlapping between contiguous frames).

-Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.

-In severe snow, rain, wind or in dawn / dusk.

-A moving object comes close to the camera.

Time schedule

You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event.

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <Time schedule>.

To set the timer event

1.Set <Timer event setup> to <Enable>.

2.Specify the <Activation time>.

•Always : Always activates in operated mode at the set interval.

•Only scheduled time : Periodically activates in operated mode at a specified time and date.

3.Specify the <Transfer interval>.

4.Specify the activation conditions.

•FTP sending : Specify the use of the FTP transfer if an event occurs.

•Record : Specify the use of recording if an event occurs.

5.When done, click [Apply ( )].

68_ setup screen