setup screen
Alarm input
You can set the alarm input type, activation time, and operation mode.
1.From the Setup menu, select the
<Event ( 
)> tab.
2.Click <Alarm input>.
3.Specify an input device.
•Type
-Normal Open : It is normally open, but if it is closed, an alarm will be triggered.
-Normal Close : It is normally closed, but if it is open, an alarm will be triggered.
4.Specify the <Activation time>.
•Always : Always check if an alarm occurs. It activates in operated mode when the alarm occurs.
If set to Always, the activation time cannot be changed.
•Only scheduled time : Check if an alarm occurs at a specified day of the week for a specified time period. It activates in operated mode when the alarm occurs.
•[ 
] : Reset all settings.
5.Specify an operation that will perform if an alarm occurs.
•Alarm output : Select whether to set the alarm output if an alarm is incoming, and specify the alarm output time.
•FTP sending : Specify the use of FTP transfer in the alarm input setup.
•
•Record : Specify the use of recording in the alarm input setup.
•Goto Preset : Specify the use of it if the camera moves to a preset position upon an alarm input
Only if the camera pan/tilt receiver is installed, GoTo Preset is available.
6.When done, click [Apply ( 
)].
66_ setup screen