Cisco Systems CIVS-IPC-2500 Adjusting Back Focus on the IP Camera section on, Front of IP Camera

Chapter 1 Overview

IP Camera Physical Details

Figure 1-1 Front of IP Camera

		1	Lens opening	The IP camera supports a variety of C and CS mount lenses, which
				attach here.
				For best performance, Cisco recommends that you use a DC auto
				iris lens.
2			Focus ring	Allows you to adjust the back focus of the IP camera.
				You must loosen the focus ring hex screw on the bottom of the IP
				camera before you can rotate the focus ring. For instructions, see
				the “Adjusting Back Focus on the IP Camera” section on page 2-7.
3			Microphone	Captures audio.
				There also is a connection for an optional external microphone on
				the rear of the IP camera.
4			Activity LED (green)	Indicates activity as follows:
				•	Off—No activity.
				•	Blinking—Activity detected.
				Activity can occur when the IP camera communicates with the
				network or when a user views video from the IP camera.
5			Ready LED (amber)	Indicates power state as follows:
				•	On—Power is on.
				•	Off—No power.
				• Blinking—IP camera is starting up. The start up process takes
					15 to 20 seconds.
					Cisco Video Surveillance System IP Camera User Guide
	OL-14220-01					1-3