Cisco Systems CIVS-IPC-2500 manual Action Explanation

Page 14

Chapter 2 Getting Started

Installing the IP Camera

Warning The power supply must be placed indoors. Statement 331

Note If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA enclosure.

Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045

Warning This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353

Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019

Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable

To install the IP camera, follow the steps in Table 2-1. For illustrations of the connectors and ports that the steps refer to, see the “IP Camera Physical Details” section on page 1-2.

.
Table 2-1	Installing the IP Camera

	Action	Explanation

Step 1	Attach a lens to the lens opening on the IP camera.	• If you are using a CS mount lens, screw the lens into
		the lens opening. The IP camera accepts CS-mount
		lenses with a lens protrusion of up to 5 mm.
		• If you are using a C mount lens, screw the C mount
		lens adapter that is supplied with the IP camera into
		the lens opening, then screw the lens into the adapter.
		Ensure that the lens is clean because any dirt may degrade
		the quality of video images.
		Note Save the lens opening dust cap and replace the dust
		cap if you remove the lens.

Step 2	If you are using a DC auto iris lens, connect its cable to	For best performance, Cisco recommends that you use a
	the DC auto iris lens connector on the IP camera.	DC auto iris lens.

Step 3	Optional. Connect a speaker to the speaker output jack	A speaker plays audio that is captured by a microphone
	on the rear of the IP camera.	that is attached to the PC on which you view video from
		the camera.

Cisco Video Surveillance System IP Camera User Guide

2-2	OL-14220-01

Image 14

Contents Cisco Video Surveillance IP Camera User Guide Americas HeadquartersCisco Video Surveillance System IP Camera User Guide N T E N T S IiiStatus Windows Overview OrganizationCisco Video Surveillance System IP Camera User Guide IP Camera Features OverviewIP Camera Physical Details Adjusting Back Focus on the IP Camera section on Front of IP CameraDescribed in the Resetting the IP Camera section on Rear of IP CameraSide of IP Camera DC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation Performing the Initial Setup of the IP Camera ProcedureAccessing the IP Camera Windows Protocol//192.168.0.100Http//203.70.212.52 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.521024Adjusting Back Focus on the IP Camera Powering the IP Camera On or OffInitial Setup of the IP Camera Resetting the IP CameraReset Type Procedure Remarks Section onConfiguring and Managing the IP Camera Configuration Overview Configuration Item Explanation Guidelines for Use ReferenceSee the Audio Window section See the Alarm I/O PortsPreset Positions See the Security WindowsNavigating the Configuration Windows SnmpDevice Settings Setup WindowsBasic Setup Window Option DescriptionNetwork Settings Advanced Setup Window CDPRTP/RTSP IP Filter Window QoSUsers Window Administration WindowsUsers Window, Maintenance Window, Firmware Window, Administrator User ListMaintenance Window Firmware Window OptionVideo Window MPEG-4 SettingsAudio/Video Windows Video Window, Audio Window,Video Adjustment Options Audio Window Day/Night VisionFull Duplex Talk and Listen Security WindowsDuplex Talk and Listen Users Window section on Product Process WindowInitialization Window Applications Windows Complexity WindowMail & FTP Window Primary Smtp ServerSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Mail BodyMotion Detection Window Secondary FTPEvent Window Clear button Event ScheduleNew Schedule Trigger EventVideo Attachment Snmp WindowMessages, see the Mail & FTP Window section on Alarm I/O Ports Window Manual Control Settings Alarm Input SettingsAlarm Output Settings PTZ RS-485 WindowPort Settings Preset PositionZoom In button Preset Positions WindowPatrol Sequence Zoom Out buttonFocus Near button Status WindowsFocus Far button System Status System WindowAudio/Video Window Network Audio SettingNetwork Window Sys Log Server Syslog & Log WindowLog System log messages Log ListMessage Explanation Address Smtp log messages Video Log WindowFTP log messages Delete button Delete All buttonViewing Video through the Home Window Overview Home Window OverviewHome Window IP camera controls Home Window ControlsControl Description PTZ RS-485 Window section onInformation, see the PTZ RS-485 Window section on Video display and audio controlsSave Enabling audio, see the Audio Window section onRtsp//ipaddress/img/media.sav Accessing the Primary Stream by using VLC PlayerViewing Video through Third-Party Devices or Software Rtsp//ipaddress/code OL-14220-01 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM Feature IP Camera Implementation Compatible with VSMFor instructions, see the Video Window section on Guidelines for Using the IP Camera with VSMObtaining the Required Driver Pack Troubleshooting the IP Camera when used with VSM OL-14220-01 D E IN-1Dhcp IN-2Http IN-3Https IN-4LED IN-5See PTZ IN-6PTZ IN-7IN-8 IN-9 IN-10

Related manuals

Manual 92 pages 39.99 Kb