(ALC)
➜
Press [Enter]
SIZE
MANU
When you press [ENTER] key after selecting MANU in the IRIS item, an additional screen appears in which you can set manually opening or closing the IRIS.
|
| BLC |
|
|
|
| USER... | |||
|
| LEVEL | (0) | |||||||
|
| RET |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
| SIZE |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
➜
Press [Enter]
LOCATION
SIZE
|
| CAMERA ID | ON... |
| |
|
|
| |||
|
| IRIS |
| MANU... |
|
|
| SHUTTER | OFF |
| |
|
| AGC | LOW |
| |
|
| WHITE BAL | ATW |
| |
|
| FOCUS MODE | AF |
| |
|
| MOTION DET | OFF |
| |
|
| COLOR/BW | COLOR... |
| |
|
| PRIVACY | ... |
| |
|
| SPECIAL | ... |
| |
|
| PRESET | ... |
| |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
Press the
ENTER button.
(MANUAL)
LEVEL | (00) |
RET |
|
E
LOCATION
LOCATION
SHUTTER
Use [Left, Right] key in the LEVEL menu to control the video output level(brightness).
WDR
The WDR camera is a
You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image. The AUTO slow electronic shutter supports 10 shutter speeds from x2 to x160 and sets the shutter speed to be slow In order to make the image on the screen more distinct and brighter when you photograph under dark illumination. If you want to sense the light brightness to control the shutter speed to the brightness automatically, select the AUTO slow shutter.
(VIDEO SET) |
(VIDEO SET) |
| |
|
| |
IRIS |
| WDR... |
SHUTTER | OFF | |
AGC | OFF | |
WHITE BAL | ATW1 | |
DIS | ON | |
FOCUS MODE | AF | |
SPECIAL | ... | |
EXIT | QUIT | |
➜
Press [Enter]
(WDR)
LEVEL1 |
| I | H | |
LEVEL2 | I | H | ||
FLICKERLESS |
| OFF |
| |
RET |
|
|
| |
IRIS | ALC... | |
SHUTTER |
| OFF |
AGC | OFF | |
WHITE BAL | ATW1 | |
DIS | OFF | |
FOCUS MODE | AF | |
SPECIAL | ... | |
EXIT | QUIT | |
-LEVEL 1 : Controls the shutter speed while WDR operates.
-LEVEL 2 : Controls the whole brightness while WDR operates.
-FLIKERLESS : This is for preventing flicker on the screen when NTSC system is used in 50HZ power supply region and PAL system is used in 60HZ power supply region. That is to prevent shaking on the screen resulted from the discordance of the vertical sync frequency and the flicker frequency of the illumination. While this menu is ON, the electronic shutter is fixed to 1/100sec (NTSC) or 1/120 sec (PAL).
Keep pressing both Left and Right in the SHUTTER menu, the speed will change in the following sequence.
➝ OFF ➝ AUTO X2 ➝ AUTO X4 ➝ AUTO X6 ➝ AUTO X8 ➝ AUTO X12 ➝ AUTOX16 ➝ AUTO X20 ➝ AUTO X40 ➝ AUTO X80 ➝ AUTO X160 ➝ OFF ➝ 1/100(1/120) ➝ 1/250 ➝ 1/500 ➝ 1/1000 ➝ 1/2000 ➝ 1/4000 ➝ 1/10K
❈In case the IRIS mode is set to WDR, only the following modes are available.
➝ OFF ➝ AUTO X2 ➝ AUTO X4 ➝ AUTO X6 ➝ AUTO X8 ➝ AUTO X12 ➝ AUTOX16 ➝ AUTO X20 ➝ AUTO X40 ➝ AUTO X80 ➝ AUTO X160