AT&T 8102, 8110 user manual Removing and Covering the Auto Answer Button

Page 22

Removing and Covering the Auto Answer Button

If you are have an 8110 telephone, you may want to disable the Auto Answer button ([ Auto ]) so that it cannot be activated accidentally. Follow this procedure to remove the Auto Answer button and cover the opening from which you removed the button.

Note: To complete this procedure, you will need the slot cover which is shipped in the box with the telephone. You may also need a pair of needlenose pliers.

1Press [ Auto ] so that the button is in the "up" position

2Lift the button from its slot on the face of the telephone. (You will probably want to use a set of needlenose pliers for this task.) See Figure 11.

3Take the slot cover (provided with the telephone) and place it in a horizontal position in the empty slot. See Figure 11. Be sure that the cap is snug with the face of the telephone.

19

Image 22

Contents AT&T Trademarks Contents Important Safety Instructions UseService Consignes DE Securite Importantes EmploiConservez CES Instructions EntretienYour 8102 and 8110 Telephones Appendix BPage TOP View 8110 Telephone Top, Side, and Bottom Views Handset Adjunct equipment jack On the 8102 only Auto Answer button On the 8110 onlyFlash button Tone Selector Fast or Slow Ringer Volume controlProgram button Line jack Installing Your Telephone Table/Desk InstallationHandset cord jack Handset jack Wall Installation Rotating the Handset TabTriangle Mounting studs Base Base Locking Tab Voice Terminal Wall Using the Features Labeling the Programmable Dialing Button Designation CardRemoving and Covering the Auto Answer Button Page Using the Features Answering and Placing a CallTo place a call using the speakerphone for 8110 users To end a callAuto Answer for 8110 Users To turn off the Auto Answer featureTo have your telephone automatically answer a call To put a call on hold FlashHold To return to the held callMessage Mute for 8110 UsersPersonalized Ring Programmable Dialing ButtonsProgrammable Dialing Buttons To dial a number with a programmable dialing button Redial With Auto-PauseTo erase a number stored on a programmable dialing button To erase ALL stored access codes To program an automatic pause for redialed numbersTo prevent other party from hearing you To mute microphone Speakerphone for 8110 UsersTo place/answer a call without lifting the handset To change from speakerphone to handsetAppendix a Page Originating Calls Appendix BAnswering Calls Putting Calls on HoldSwitching from the Headset to the Handset Auxiliary Power for the 8110 Telephone Appendix CAppendix D If Your Telephone Does Not RespondFCC Registration and Repair Information Connection and USE with the Nationwide Telephone NetworkInterference Information Right of the Telephone CompanyAT&T Warranty Information Erasing a Number in Memory Storing Numbers in MemoryDialing Numbers in Memory Holding and Returning to a CallUsing the Built-in Speakerphone For 8110 Users Only Using the Auto Answer Feature For 8110 Users OnlyComcode 555-015-131 Graphics AT&T Issue 2, March

Related manuals

Manual 4 pages 29.68 Kb