3Com FlexWATCH 3110 user manual Network Video Server User’s Manual

Network Video Server		User’s Manual
	Enter IP Address	: 10.10.213.22
	Enter Network Mask : 255.255.0.0
	Enter Gateway	: 10.10.1.1

Entered network configuation

IP Address : 10.10.213.22

Network Mask : 255.255.0.0

Gateway : 10.10.1.1.

Do you wish to apply your new network configuration ? (y/n/q): y

10)If following messages come up on your screen with “bash# ” prompt, the new network configuration has successfully applied.

Your network configuration was changed. Shutting down interface eth0 [ OK ] Shutting down interface ppp1 [ OK ] Shutting down interface ppp2 [ OK ] Setting network parameters [ OK ] Bringing up interface lo [ OK ]

Bringing up interface eth0 eth0: Setting half-duplex based on auto-negotiated partner ability 0000. [ OK ]

Bringing up interface ppp1 [ OK ]

Your new network configuration was applied. bash#

11)To check whether your Network configuration is correctly applied or not, press ‘ifconfig’ command after “bash#” prompt and then following messages will show up. On the second line of the ‘eth0’ message, you can check the assigned IP and Mask values. Gateway value is not seen here. If the values are different from what you want to set-up, try again the Network configuration from step 8).

31 Seyeon Tech Co., Ltd

- INTPLUS [2005] -