3Com FlexWATCH 3110 user manual IP Assignment through Hyper Terminal mode

Network Video Server User’s Manual

8)Click “Save IP Address” button to save IP-Address in the Flash Memory.

9)Click “Go to Home Page” button to access to FlexWATCHTM Web browser.

10)For server configuration, click “Admin” Icon and Input User ID and Password (Factory default is root : root) to get into configuration mode and then press “OK” button.

)Note

Once you changed the IP address of FlexWATCHTM server, you need to connect the server with the changed IP address. If you lost the IP address assigned to FlexWATCHTM server, you need to set-up a new IP address again.

)Note

If IP address set result is failed, please check whether correct IP/MAC address is entered. And try again with correct IP/MAC address, or please use HyperTerminal method.

4.2IP Assignment through Hyper Terminal mode

Microsoft Windows provides Terminal emulation program, namely Hyper Terminal. For HyperTerminal connection, Power, RS-232 Cable and LAN cable must be connected to FlexWATCHTM server with user’s PC. LAN cable is to run Web browser after configuration using HyperTerminal. You can continue the below configuration after Network setting and the next process will be same as using Installation Wizard Program.

1)Link up with the provided serial cable between COM port at FW-3440 and COM1 or COM2 at user’s PC.

2)Run Hyper Terminal Program on user’s PC.

Window start> Program> Accessories> Communication> Hyper Terminal

3)If Hyper Terminal window come up as below, input HyperTerminal name (ex. Flexwatch) and press ‘OK’ button.

28 Seyeon Tech Co., Ltd

- INTPLUS [2005] -