3Com FlexWATCH 3110 user manual Aoip Setup, How to use Aoip service

Network Video Server User’s Manual

LAN : This is default path the send any data to outside.

Modem : when PSTN or other medium than LAN is used to send data to outside. This service port must be checked when any data is to be sent through PSTN or other medium than LAN which is connected to COM port.

)Note

Service path must be set up and checked before starting WAN configuration to send any data through external PSTN modem connection or equivalent

If LAN is to be used, select “None(LAN)” option.

6 AOIP Setup

AOIP (Always-On-IP) is an IP gateway through which user can access the FlexWATCH™ server when it is connected to Dynamic IP address. Thus, if the server should be connected to the Dynamic IP network and you want to view live video from anywhere, it is the right solution for you.

6.1How to use AOIP service

Following is a step you need to take to use AOIP service

-Contact your local vendor or sales@flexwatch.com to get user account for AOIP service.

-Register product in the AOIP server under your account

-Set up your network (Port mapping function of your router)

-Enable AOIP service option in the FlexWATCH™ server.

60 Seyeon Tech Co., Ltd

- INTPLUS [2005] -