3Com FlexWATCH 3110 user manual LAN Cable Environment, Cross-over cable, IP address Network Mask

Network Video Server User’s Manual

over cable.

2.2.1LAN Cable Environment

If your PC is connected to network through LAN cable, you need to connect FlexWATCHTM server to LAN port of Hub or Router.

2.2.2Cross-over cable

If LAN network is not available, you can directly connect FlexWATCHTM server to your PC through Cross-over cable. In this case, you need to prepare Cross-over cable separately (Note that The LAN cable included in the product package is not Cross-over cable, but normal straight cable) and you need to set your PC IP address as 10.20.30.41 and connect the server with Factory default IP address, 10.20.30.40 through web browser.

Following is brief procedure to connect the server after changing PC IP address.

1)Click right button of your mouse on the ‘My Network Places’ icon in the main screen window.

2)Click right button of your mouse on the ‘Local area connection’ icon and select ‘Property’ option.

3)Select ‘Internet protocol (TCP/IP)’ option and click ‘Property’ icon.

4)Select ‘use the following IP address’ option from the TCP/IP property option and set the IP address as follow

-IP address : 10.20.30.41

-Network Mask : 255.255.255.0

5)Connect FlexWATCHTM server using Cross-over cable to your PC and run your web browser and enter default IP address, 10.20.30.40 of FlexWATCHTM server in the URL field. Note that Cross-over cable is not supplied with product.

6)Once you are connected to the server, click Admin icon and click LAN configuration menu.

7)Enter IP address you would like to assign to the FlexWATCHTM server and change your PC IP address again.

24 Seyeon Tech Co., Ltd

- INTPLUS [2005] -