Grandstream Networks GXV3611 user manual Connect to the Camera using Static IP

Page 13

GXV3611 Mini IP Dome Camera

Connect to the Camera using Static IP.

If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168.

1.Connect your PC to the same network as the GXV3611.

2.Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure the subnet mask to 255.255.255.0.

3.Make sure that the device is turned on and connected to the network.

4.Start Internet Explorer on your computer.

5.Enter 192.168.1.168 in the address bar of the browser.

6.Enter the administrator user name and password to access the Web Configuration Interface

7.The default user name and password are both set to admin.

8.IE will indicate that “This website wants to install the following add-on: ‘GSViewerX.cab’ from ‘Grandstream Networks Inc’.” Install this add-on by following the instructions in IE.

9.You will see the home page.

Firmware 1.0.4.6

Page 13 of 34

Grandstream Networks, Inc.

09/2010

Image 13
Contents Page Safety Instructions GXV3611 Mini IP Dome Camera Contents Welcome Package Contents Product Overview Connectors and cablesGXV3611-LL GXV3611 Key FeaturesPower over Ethernet PoE SIP/VoIP Support Parameters GXV3611-HD GXV3611-LL GXV3611 Lens SpecificationUsing PoE as power supply Using the Power adapter as power supplyMinimum Recommended System Requirement Connect your GXV3611Configuring the GXV3611 via Web Browser Connect to the Camera using Static IP Home web page of GXV3611-LL GXV3611 Home WebGXV3611 System Items on GXV3611 HomeSet the System Time On Screen Display OSD SettingsGXV3611 Video & Audio Audio Settings Video SettingsDynamically Assigned via Dhcp IP Address ConfigurationSet up Ddns DNS ConfigurationHttp Port GXV3611 DdnsGXV3611 SIP Go to SIP Settings TabRegister GXV3611 to a SIP Server Configure Phone List SIP Open Door SettingsGo to Phone List Tab GXV3611 Status Bootloader Version Bootloader code version numberSystem Statistics Network StatusServer Maintenance GXV3611 MaintenanceFirmware Upgrade and Provisioning Items GXV3611 User ManagementSmtp Server Settings Performing a firmware upgradeGXV3611 Smtp GXV3611 Alarm Event FTP SettingsGXV3611 FTP Connect Alarm Input Equipment to the GXV3611 How Alarm Input and Alarm Output WorkSet up Alarm Actions Dropdown list for date Available Time Set up DI Alarm Time ScheduleSet up Smoke Alarm Action How to connect an Alarm Output Equipment to GXV3611Set up Smoke Alarm Time Schedule GXV3611 Motion Detection Setup Motion Detection Monitored AreaTo Edit a Monitored Area GXV3611 System Log Configure Motion Detection Time Schedule & Alarm ActionsTo Remove a Monitored Area What is the default IP address of GXV3601/3501/3504/3611? FAQAlarm Triggered Events do not work in GSurf Port forwarding Some notes on using SD cards / USB drivesTested PC display adapters Display Adapter Test Result