GXV3611 Mini IP Dome Camera
GXV3611 Motion Detection Page
The GXV3611 supports Motion Detection. To utilize this feature, please follow the below steps:
1.Setup the motion detection monitored area.
2.Configure the motion detection time schedule.
3.Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions – If this option is selected, the motion detection regions will be displayed on the screen with a white border.
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center is checked for Alarm Actions, the white border will flash red when a motion detection alarm is triggered.
To Edit a Monitored Area
1.In the Select a Region dropdown list, select the region ID.
2.Click Edit.
3.Click on the video, drag and draw you preferred area.
4.Set the Sensitivity. Click the Save button to save the sensitivity.
NOTE: The Sensitivity value varies from 0 to |
|
| |
100. The larger the value is, the higher the |
|
| |
sensitivity. | Button | to save sensitivity | |
| |||
Firmware 1.0.4.6 | only | Page 29 of 34 |
|
Grandstream Networks, Inc. | 09/2010 |
|
|