Grandstream Networks GXV3611 user manual Safety Instructions

Page 2

GXV3611 Mini IP Dome Camera

Safety Instructions

These instructions are intended to assist users with the operation of the GXV3611 and also to instruct on how to avoid dangerous situations or damage to the device.

Warnings: Serious injury or death may be caused if any of the warnings below are neglected.

Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected.

Warnings Follow these safeguards to prevent serious injury or death.

Warnings:

Cautions Follow these precautions to prevent potential injury or material damage.

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with DC 12V according to the IEC60950-1 standard. Please refer to the technical specifications for more details.

Do not use a third-party power adapter or power cord

When the device is installed on the wall or ceiling, make sure that it is firmly attached.

Notice

Make sure that the power supply voltage is correct before using the camera. Do not drop the device or expose it to physical shock.

Do not expose the device to temperatures outside the range of -10 oC to +60oC when the device is in operation.

Do not expose the device to damp/wet conditions or high electromagnetism radiation. To avoid heat accumulation, make sure that your operating environment has proper ventilation.

Do not attempt to open, disassemble, or modify the device

A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average life time. The average life time varies from the differences between operating environments and usage history. Regular maintenance checks are recommended for all users. Please contact your dealer for more details.

Notice

The smoke detector in the GXV 3611 mini dome camera is not intended to replace any smoke

Firmware 1.0.4.6

Page 2 of 34

Grandstream Networks, Inc.

09/2010

Image 2
Contents Page Safety Instructions GXV3611 Mini IP Dome Camera Contents Welcome Package Contents Connectors and cables Product OverviewGXV3611 Key Features GXV3611-LLPower over Ethernet PoE SIP/VoIP Support GXV3611 Lens Specification Parameters GXV3611-HD GXV3611-LLMinimum Recommended System Requirement Using the Power adapter as power supplyUsing PoE as power supply Connect your GXV3611Configuring the GXV3611 via Web Browser Connect to the Camera using Static IP GXV3611 Home Web Home web page of GXV3611-LLItems on GXV3611 Home GXV3611 SystemGXV3611 Video & Audio On Screen Display OSD SettingsSet the System Time Video Settings Audio SettingsIP Address Configuration Dynamically Assigned via DhcpHttp Port DNS ConfigurationSet up Ddns GXV3611 DdnsRegister GXV3611 to a SIP Server Go to SIP Settings TabGXV3611 SIP Go to Phone List Tab SIP Open Door SettingsConfigure Phone List System Statistics Bootloader Version Bootloader code version numberGXV3611 Status Network StatusFirmware Upgrade and Provisioning Items GXV3611 MaintenanceServer Maintenance GXV3611 User ManagementGXV3611 Smtp Performing a firmware upgradeSmtp Server Settings GXV3611 FTP FTP SettingsGXV3611 Alarm Event Set up Alarm Actions How Alarm Input and Alarm Output WorkConnect Alarm Input Equipment to the GXV3611 Set up DI Alarm Time Schedule Dropdown list for date Available TimeSet up Smoke Alarm Time Schedule How to connect an Alarm Output Equipment to GXV3611Set up Smoke Alarm Action To Edit a Monitored Area Setup Motion Detection Monitored AreaGXV3611 Motion Detection To Remove a Monitored Area Configure Motion Detection Time Schedule & Alarm ActionsGXV3611 System Log FAQ What is the default IP address of GXV3601/3501/3504/3611?Alarm Triggered Events do not work in GSurf Some notes on using SD cards / USB drives Port forwardingTested PC display adapters Display Adapter Test Result