Grandstream Networks GXV3611 SIP Open Door Settings, Configure Phone List, Go to Phone List Tab

Page 21

GXV3611 Mini IP Dome Camera

STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT.

Stream – To choose between Primary and Secondary stream. Preferred Vocoder – To choose different Vocoder type.

Registration Expiration – This parameter allows users to specify the time frequency (in minutes) in which the GXV refreshes its registration with the specified registrar. The default interval is 60 minutes.

Local SIP Port – This parameter defines the local SIP port used to listen and transmit. The default value is 5060.

Local RTP Port – This parameter defines the local RTP-RTCP port pair that is used to listen and transmit. The default value is 5004.

5.Click Save to save all the changes. You need to restart the device to apply all changes.

SIP Open Door Settings

Enable SIP open door – This will close the DO connections in the back to close the circuit

connected to it.

Key to open the door – DTMF key to close the circuit. Digits 0-9 only.

Delay lock time (seconds) – This is the time in seconds that the circuit will remain closed when this function is triggered

Configure Phone List Page

To make sure the GXV3611 can make phone calls to the number you preferred when alarm is triggered. You need to add number to the phone list.

Steps to add phone number:

1.From the GXV3611 home page, click Basic Settings > SIP.

2.Go to Phone List Tab.

3.Enter the Phone number and name, click Add a Number to save all the changes.

4.Numbers added to the system will be listed in this page.

Available phone numbers

Firmware 1.0.4.6

Page 21 of 34

Grandstream Networks, Inc.

09/2010

Image 21
Contents Page Safety Instructions GXV3611 Mini IP Dome Camera Contents Welcome Package Contents Product Overview Connectors and cablesGXV3611-LL GXV3611 Key FeaturesPower over Ethernet PoE SIP/VoIP Support Parameters GXV3611-HD GXV3611-LL GXV3611 Lens SpecificationUsing PoE as power supply Using the Power adapter as power supplyMinimum Recommended System Requirement Connect your GXV3611Configuring the GXV3611 via Web Browser Connect to the Camera using Static IP Home web page of GXV3611-LL GXV3611 Home WebGXV3611 System Items on GXV3611 HomeOn Screen Display OSD Settings Set the System TimeGXV3611 Video & Audio Audio Settings Video SettingsDynamically Assigned via Dhcp IP Address ConfigurationSet up Ddns DNS ConfigurationHttp Port GXV3611 DdnsGo to SIP Settings Tab GXV3611 SIPRegister GXV3611 to a SIP Server SIP Open Door Settings Configure Phone ListGo to Phone List Tab GXV3611 Status Bootloader Version Bootloader code version numberSystem Statistics Network StatusServer Maintenance GXV3611 MaintenanceFirmware Upgrade and Provisioning Items GXV3611 User ManagementPerforming a firmware upgrade Smtp Server SettingsGXV3611 Smtp FTP Settings GXV3611 Alarm EventGXV3611 FTP How Alarm Input and Alarm Output Work Connect Alarm Input Equipment to the GXV3611Set up Alarm Actions Dropdown list for date Available Time Set up DI Alarm Time ScheduleHow to connect an Alarm Output Equipment to GXV3611 Set up Smoke Alarm ActionSet up Smoke Alarm Time Schedule Setup Motion Detection Monitored Area GXV3611 Motion DetectionTo Edit a Monitored Area Configure Motion Detection Time Schedule & Alarm Actions GXV3611 System LogTo Remove a Monitored Area What is the default IP address of GXV3601/3501/3504/3611? FAQAlarm Triggered Events do not work in GSurf Port forwarding Some notes on using SD cards / USB drivesTested PC display adapters Display Adapter Test Result