Grandstream Networks user manual GXV3611 FTP, FTP Settings, GXV3611 Alarm Event

GXV3611 Mini IP Dome Camera

Test Email Account Settings – Click the Test button to send a test email from the From E-Mailto the To E-Mailto make sure that SMTP is configured properly. If the receiver can get the test email, then the SMTP settings are ready to go.

GXV3611 FTP Page

The FTP server is used to store video files if you configure the GXV3611 to record video and upload it to the FTP server when an alarm event or motion detection is triggered.

FTP Settings

Enable FTP – The default setting is “No,” if you want the GXV3611 to upload the recorded video to the FTP server when an alarm is triggered, set this field to “Yes.”

FTP Server – The IP address or hostname of the SMTP server, ie. ftp.myserver.com.

FTP Server Port – The port that your FTP server is using.

User Name / Password – The user name and password required to log into your FTP server

Path – The directory in the FTP server where recorded video will be uploaded.

Test FTP Account Settings – Click the Test button to upload a sample file to make sure that FTP is properly configured.

GXV3611 Alarm Event Page

The GXV3611 supports alarm inputs, for example, infrared detector, smoke detector and so on.

Follow the steps to make Alarm Input work:

1.Connect alarm input equipment to the GXV3611.

2.Set up the alarm event time schedule.

3.Configure the alarm actions which you would like the GXV3611 to take when alarm is triggered.

Note: The smoke detector in the GXV 3611 mini dome camera is not intended to replace any smoke detector alarm system. The smoke detector does not comply with the National Alarm and Signaling Code, nor does it provide any form of visual or audible signal to alert the premises dwellers. You must not replace any existing smoke alarm system with this product.

Firmware 1.0.4.6	Page 25 of 34
Grandstream Networks, Inc.	09/2010