Grandstream Networks GXV3611 Some notes on using SD cards / USB drives, Port forwarding

Page 33

GXV3611 Mini IP Dome Camera

13.How can I use a cell phone to watch the GXV3501/ 3504/ 3601/ 3611 video stream? You must set the video resolution to QCIF to watch the GXV3501/3504 /3611 video stream from a cell phone. Make sure to set the bit rate to 64kbps to ensure the best video quality.

14.Why doesn’t the IP address of the device reset when I click the “Restore” button on the Maintenance page?

The GXV3501/ 3504/ 3601/ 3611 could be installed in areas that are not easy to access. For example, it could be installed on the roof of a building or the ceiling of an office. This makes it difficult to reinstall the device, therefore the “Restore” function will not clear the IP address. Press the RESET button on the device for at least 6 seconds until you hear a beep to perform a factory reset of all parameters (including the IP address).

15.Why can’t the live video stream be viewed using a mobile phone or GSurf after changing the HTTP Port of the device?

Make sure that the RTSP port of the device is set to 2000 plus the HTTP Port number. For example, if the HTTP port is 88, then the RTSP port of the device that you configured on GSurf / mobile phone should be 2088.

16.Some notes on using SD cards / USB drives.

1.The GXV3501/ 3504/ 3601 only supports FAT32 formatted USB drives

2.The GXV3501/ 3504/ 3601 support SD and SDHC

3.It takes 10-15 seconds to read SDHC and USB drives with large memory capacities. Please wait 15 seconds to unplug the SD/USB drive after you plug them into the device.

4.If there are many files (ie. 1800 or more image batch files) on the SD/USB drive, it can take up to 5 minutes to read them. Please do not refresh the web interface at this time as the GXV3501/3504 will restart reading the SD/USB drive. Grandstream is currently working on a fix for this issue.

17.Why is there a black / flashing bar at the bottom of the video feed?

This can occur if the GXV3501 /3504 does not recognize the standard of the connected camera. If you experience this issue, please restart the GXV3501 /3504. The GXV3501 /3504 will detect the standard of the connected camera and use it when the GXV3501 /3504 boots up. To avoid this make sure to connect analog cameras before booting up the GXV3501 /3504.

18. Port forwarding

Two ports must be forwarded on your router to watch video from a GXV3501/3504 /3601/3611 that is located on a private network from a PC in a public network. The web port (HTTP) and the RTSP port. Please make note that the RTSP port number changes according to the web port. If the web port is 80, then the RTSP port is 554. If the web port is not 80, then

Firmware 1.0.4.6

Page 33 of 34

Grandstream Networks, Inc.

09/2010

Image 33
Contents Page Safety Instructions GXV3611 Mini IP Dome Camera Contents Welcome Package Contents Product Overview Connectors and cablesGXV3611-LL GXV3611 Key FeaturesPower over Ethernet PoE SIP/VoIP Support Parameters GXV3611-HD GXV3611-LL GXV3611 Lens SpecificationUsing PoE as power supply Using the Power adapter as power supplyMinimum Recommended System Requirement Connect your GXV3611Configuring the GXV3611 via Web Browser Connect to the Camera using Static IP Home web page of GXV3611-LL GXV3611 Home WebGXV3611 System Items on GXV3611 HomeOn Screen Display OSD Settings Set the System TimeGXV3611 Video & Audio Audio Settings Video SettingsDynamically Assigned via Dhcp IP Address ConfigurationSet up Ddns DNS ConfigurationHttp Port GXV3611 DdnsGo to SIP Settings Tab GXV3611 SIPRegister GXV3611 to a SIP Server SIP Open Door Settings Configure Phone ListGo to Phone List Tab GXV3611 Status Bootloader Version Bootloader code version numberSystem Statistics Network StatusServer Maintenance GXV3611 MaintenanceFirmware Upgrade and Provisioning Items GXV3611 User ManagementPerforming a firmware upgrade Smtp Server SettingsGXV3611 Smtp FTP Settings GXV3611 Alarm EventGXV3611 FTP How Alarm Input and Alarm Output Work Connect Alarm Input Equipment to the GXV3611Set up Alarm Actions Dropdown list for date Available Time Set up DI Alarm Time ScheduleHow to connect an Alarm Output Equipment to GXV3611 Set up Smoke Alarm ActionSet up Smoke Alarm Time Schedule Setup Motion Detection Monitored Area GXV3611 Motion DetectionTo Edit a Monitored Area Configure Motion Detection Time Schedule & Alarm Actions GXV3611 System LogTo Remove a Monitored Area What is the default IP address of GXV3601/3501/3504/3611? FAQAlarm Triggered Events do not work in GSurf Port forwarding Some notes on using SD cards / USB drivesTested PC display adapters Display Adapter Test Result