Silicon Optix CM-525P manual Program & Operation, Accessing On-Screen Menu Utility

3.PROGRAM & OPERATION

3.1Getting Started

Before you program or operate OpenEye OPTIX Dome Camera, you must select the dome camera by pressing the dome camera NO + CAM on the OpenEye Keyboard Controller.

Example: Pressing 1, 0 and CAM key sequentally will select the dome camera 10. The selected dome camera ID will be displayed on the LCD monitor of the OpenEye Keyboard Controller.

3.2Accessing On-Screen Menu Utility

A.CONTROLLING THE ON-SCREEN UTILITY

You can open the On-Screen menu utility on your monitor by pressing the (MENU) KEY on the keyboard controller. The following On-Screen utility will appear.

ACTION	FUNCTION
MENU	Call on On-Screen Menu Utility or Exit (Escape)
Joystick left or right	Go into the sub-menu items.
	Execute the command (Exit)
	Change Value
	Navigate through menu items
Joystick up or down	Navigate through menu items
Joystick down	Finish editing title
Zoom Handle twist	Change Value
	Enter editing title mode.
CTRL + Joystick	Change value of angle/zoom ratio
CLR/ESC	Move to the previous mode

27104AF 21