Silicon Optix CM-525P manual Mode & No, Tour Setup TOUR1 TOUR2 TOUR8 Speed Fast Freeze OFF

4. PTZ SETUP MENU

5Mode & No.

Select between 4 different modes and No. (Preset, Auto Scan, Tour and Pattern)

		TOUR SETUP		TOUR SETUP
NO. 001		:	NO. 001	:
SPEED		: FAST	SPEED	: FAST
FREEZE		: OFF	FREEZE	: OFF
===	=== === === === === ===		SC2 === === === === === ===
=== === === === === === ===			=== === === === === === ===
=== === === === === === ===			=== === === === === === ===
=== === === === === === ===			=== === === === === === ===
=== === === === === === ===			=== === === === === === ===
=== === === === === === ===			=== === === === === === ===
SAVE EXIT			SAVE EXIT

Each TOUR can harmonize 42 different modes among Preset (1~319), AutoScan (1~8), Pattern (1~4) and only Tour1 can obtain Tour 2~8 additionally.

If you want to clear the 4 mode, press the HOME button.

Note: If there is no memorized Preset, AutoScan, Tour or Pattern, you can not set up this function.

6Tour Call: Input the Tour NO. (1~8) and press the TOUR button to call the Tour.

7Tour Stop: If you have a Joystick connected, move the joystick anywhere to stop the function.

	TOUR SETUP		TOUR SETUP		TOUR SETUP
NO. 001	TOUR1	NO. 001	: TOUR2	NO. 001	: TOUR8
SPEED	: FAST	SPEED	: FAST	SPEED	: FAST
FREEZE	: OFF	FREEZE	: OFF	FREEZE	: OFF
001 319 TR2 TR8 === === ===		002 SC4 === === === === ===		PT2 === === === === === ===
=== === === === === === ===		=== === === === === === ===		=== === === === === === ===
=== === === === === === ===		=== === === === === === ===		=== === === === === === ===
=== === === === === === ===		=== === === === === === ===		=== === === === === === ===
=== === === === === === ===		=== === === === === === ===		=== === === === === === ===
=== === === === === === ===		=== === === === === === ===		=== === === === === === ===
SAVE EXIT		SAVE EXIT		SAVE EXIT

PRESS 1 + Tour Button

TOUR1	PRESET1
PRESET 1	DWELL TIME 5 SEC
	(DEFAULT: 5 SEC)
TOUR1	PRESET 319
PRESET 319	DWELL TIME 5 SEC
	(DEFAULT: 5 SEC)
TOUR2	PRESET 2
	DWELL TIME 5 SEC
PRESET 2
	(DEFAULT: 5 SEC)
TOUR2	TOUR 2	SCAN 4
		DWELL TIME 5 SEC
PRESET 4	SCAN 4 END	(DEFAULT: 5 SEC)
TOUR8	TOUR 8	TOUR 8
		DWELL TIME 5 SEC
PATTERN 2 START	PATTERN 2 END
		(DEFAULT: 5 SEC)

Quick Move

Dwell Time

Programmed Speed

36 27104AF