Silicon Optix CM-525P manual Cooler/Heater

F. COOLER/HEATER

This function will allow users to keep the inside temperature of the OpenEye OPTIX Pre-Pack at a stable operating condition. If the temperature in the dome is to high, the cameras Auto Mode will regulate the temperature by turning on the Cooler. On the contrary, the heater will make the inside temperature getting higher if the unit is cold.

--- OpenEye OPTIX PRE-PACK ---		COOLER/HEATER SETUP
		CELSIUS/FAHRENHEIT	:CELS.
HOME
		COOLER MODE	:AUTO
SYS INFO	AREA TITLE	HEATER MODE	:AUTO
DISPLAY	PRIVACY ZONE
DOME SETUP	OSD DISPLAY	SAVE EXIT

ALARMS	VIEW ANGLE
	POSITION
CAMERA
	COOLER/HEATER
CONFIG
LANGUAGE
EXIT

1CELCIUS/FARENHEIT: CELS./FAHR

2COOLER MODE (ON/OFF.AUTO) ON: Always ON

OFF: Always OFF

AUTO: ON ; 45o C (113oF) OFF ; 35oC (95oF)

3HEATER MODE (ON/OFF/AUTO) ON: Always ON

OFF: Always OFF

AUTO: ON ; 0o C(32o F) OFF; 10oC (50oC)

30 27104AF