Silicon Optix CM-525P manual Alarms

4. PTZ SETUP MENU

4.6 ALARMS

	1 NO. Alarm Input
--- OpenEye OPTIX PRE-PACK ---				ALARM SETUP
	NO.		PRI	MODE IN OUT		TIME
HOME
			1	===	OFF OFF	05
		01
SYS INFO	02		1	===	OFF OFF	05
DISPLAY
	03		1	===	OFF OFF	05
DOME SETUP
	04		1	===	OFF OFF	05
ALARMS
	05		1	===	OFF OFF	05
CAMERA
	06		1	===	OFF OFF	05
CONFIG
	07		1	===	OFF OFF	05
LANGUAGE
	08		1	===	OFF OFF	05
EXIT

SAVE EXIT

2PRI (Priority)

		ALARM SETUP
NO.	PRI	MODE IN		OUT	TIME
01		===	OFF	OFF	05
	2
02	1	===	OFF	OFF	05
03	1	===	OFF	OFF	05
04	1	===	OFF	OFF	05
05	1	===	OFF	OFF	05
06	1	===	OFF	OFF	05
07	1	===	OFF	OFF	05
08	1	===	OFF	OFF	05

SAVE EXIT

3Mode

Stored Preset, Tour, Auto Scan and Pattern

		ALARM SETUP
NO.	PRI	MODE IN			OUT TIME
01	2		PT2	OFF	OFF	05
02	1	===		OFF	OFF	05
03	1	===		OFF	OFF	05
04	1	===		OFF	OFF	05
05	1	===		OFF	OFF	05
06	1	===		OFF	OFF	05
07	1	===		OFF	OFF	05
08	1	===		OFF	OFF	05

SAVE EXIT

Note: If there is no memorized Preset, AutoScan, Tour or Pattern, you cannot set up this function

4In: OFF (No Activation)

NC (Normally Closed)

NO (Normally Open)

5Out: 1~4 (Relay Out 1, 2, 3, 4), Off (No Output)

6Time: Alarm will be held for programmed time (05 to 99 sec.)

38 27104AF