Silicon Optix CM-525P manual SYS Info

4. PTZ SETUP MENU

4.2 SYS INFO

The OpenEye OPTIX Camera’s set up menu provides essentiaI information about the dome camera if service is required. When you view this screen, you can determine the camera type and ROM version. The information on this screen can't be modified.

SYSTEM INFORMATION

--- OpenEye OPTIX PRE-PACK ---	------------------------------------------------------------------
HOME	CAMERA TYPE	: 25XD / NTSC
SYS INFO	H/W VERSION	: VI. 03P
DISPLAY	S/W VERSION	: VI. 44P
DOME SETUP
	PROTOCOL	: OPENEYE OPTIX
ALARMS
CAMERA	COMM. MODE	: RS485
CONFIG	BAUD RATE	: 9600
LANGUAGE

EXIT---------------------------------------------------------

EXIT : (CLR) KEY

For the multi-protocol, please refer to the multi-protocol selection guide. If you want to use other protocols, consult with your local distributor.

Note: If you want to go to the previous mode, select the CLR/ESC key. To exit main MENU without saving, select the MENU button. To exit and save the options, select the save button (OpenEye OPTIX protocol only)

27104AF 25