Active Thermal Management UVS-7111 Mode Selection of the wireless networking mode, Basic Setting

UVS-7111 User's Manual Basic Setting

Mode: Selection of the wireless networking mode

1. Infrastructure: Infrastructure networking mode

Thiscamera uses the wireless Access Point (AP) as the hub when set to infrastructure networking mode and connects to the network via the wireless AP.

INTERNET ADSL MODEM BASE STATION

WORKSTATION 1 WORKSTATION 2

Infrastructure networking mode AdHoc networking mode

2. AdHoc: Point-to-point networking mode

This camera connects to other wireless devices via a wireless network when it is in the AdHoc point-to-point networking mode; i.e. the product connects to other devices equipped with built-in wireless connection function without the need to access from any AP.

Note: Where no IP address is assigned from the DHCP server, the system will set the Link-Local Address automatically.

Authentication Type: Network authentication type

1.Open System: No encryption.

2.Shared Key: Security of data is highly protected by encryption during transmission.

Note: Refer to the user setting instructions of your wireless IP sharer for more information.

Network authentication type

38