Active Thermal Management manual UVS-7111 Users Manual, the current security setting

UVS-7111 User's Manual

Internet Explorer displays	Change the IE security setting to allow downloading unsigned ActiveX
the following message:	control.
Downloading the ActiveX
control is prohibited under
the current security setting.
The camera can operate	• A firewall mechanism might have been activated. Check the setting of
only in the LAN rather in		your system or ask your network administrator. To access the camera
the Internet environment.		from the Internet, you may need to change the setting of the firewall.
	• Make sure that your camera does not conflict with other servers on the
		same LAN.
	• Check the router and make sure that its setting allows it to access your
		camera from the Internet.
The number of frames	• Congestion of the network or objects of the image may affect the
transmitted are less than		number of frames transmitted. The number of frames may be less than
the defined value.		the defined value when they are transmitted via a congested network.
	• The number of frames transmitted may become less when multiple
		users are viewing the video stream.
	• The network hub might be another reason for this problem, especially
		when multiple camera video streams are viewed simultaneously.
When the audit function is	• When you connect your PC to the camera, no sufficient bandwidth is
activated, the video		available to support more frames with the current resolution of video
streaming area becomes		streams. Reduce the resolution to QCIF(176x144) or CIF (320x240) and
black or the transmission		deactivate the audio function.
becomes slower.	• The audio signal needs 32 to 64 kbps of your bandwidth. You can
		deactivate the audio function to improve the image quality. Your Internet
		service may have not sufficient bandwidth to support audio transmission.
Images cannot be	• Make sure the IP address of the gateway and domain server (DNS)
transmitted via e-mail or		have been defined correctly.
FTP.	• Where FTP still fails, contact your ISP or network administrator to check
		the FTP server.
I can't control the camera	• When communication to the camera stops, click "Refresh" on your IE
to move up, down, right,		browser to refresh the transmission.
left or to the center or	• It might be that other users are controlling the movement of the camera.
preset point.	• The horizontal/vertical movement of the camera has reached its limit.
	• The horizontal/vertical remote control option of the camera might have
		been deselected.
I can't control the camera	Delay might occur when you are accessing a video stream and remotely
to move up, down, right, or	moving the camera horizontally. Where significant delay is identified when
left smoothly.	you move the camera horizontally or vertically deactivate the audio
	streams and/or reduce the size of the video stream..

67