Philips SM30 Clear Memory Control Alarm Mode, Clearing Memory, 14.2 Confirmation, Wait display

14.7.14 CLEARING MEMORY

14.1Main menu selection

Select from the main menu by means of the left/right arrow keys: CLEAR MEMORY

14.2Confirmation

Since this is a potentially hazardous program (it will erase all programming) after pressing ENTER the display will show: ARE YOU SURE ?

PRESS < TO CLEAR

Only the left arrow key will proceed with clearing; any other key will return to the main menu without clearing the memory.

1 4

SELECT PROGRAM :

CLEAR MEMORY

1

2

ARE YOU SURE ?

PRESS < TO CLEAR

3

CLEARING MEMORY

PLEASE WAIT

4

POWER - ON - DELAY

5

MEMO RY CLEARED

SYSTEM IS DOWN

14.3Wait display

After pressing the ENTER key, the display will show that clearing memory is in advance.

14.4Power-on delay

14.5System down

When the memory is cleared the display will show that the SM30 system is down. The installer programming password must be re- entered, and the setup program run, in order to continue.

14.7.15 ALARM MODE

Alarm signals activated by a control input can be interrupted by a Call Station with higher priority. When the overruling call ends, the alarm signal will return and continue till the end of the signal.

15.1Main menu selection

Select from the main menu by means of the left/right arrow keys: CTL ALARM MODE

SELECT PROGRAM :

CTL ALARM MODE

1

2

CT L ALA RM MODE

NON - INTERRUPT

3

CTL ALARM MODE

INTERRUPTABLE

Clear Memory Control Alarm Mode

10