Kenwood TS-570D Memory Features Recalling Quick Memory, Temporary Frequency Changes

10 MEMORY FEATURES

RECALLING QUICK MEMORY

You can recall a Quick memory channel, only when using VFO frequencies for both transmitting and receiving.

1Press QUICK MEMO [MR].

• The current memory channel number appears.

•If there is no data stored in any Quick memory channel, then this step will not access Quick memory.

2Turn the MULTI/CH control to select a Quick memory channel (1 to 5).

•You cannot change memory channels while transmitting.

3To exit, press QUICK MEMO [MR] again.

Note: Memory channels cannot be changed while using the TF-SET

function.

TEMPORARY FREQUENCY CHANGES

After recalling a Quick memory channel, you can temporarily change the data without overwriting the contents of the channel. You can change the frequency even when you select OFF in Menu No. 08.

1Press QUICK MEMO [MR].

2Turn the MULTI/CH control to select a Quick memory channel (1 to 5).

3Change the frequencies and associated data.

4To store the changed data in Quick memory, press QUICK MEMO [M.IN].

•This action stores the new data in the current channel and bumps the old frequency to the next higher Quick memory channel.

5To exit, press QUICK MEMO [MR] again.

Note: Memory channel data can also be changed while using the

TF-SET function.

QUICK MEMORY ➡ VFO TRANSFER

This function copies the contents of the memory channel that you recalled, to the VFO.

1Recall a Quick memory channel.

2 Press [M>VFO].

Note: Pressing [M>VFO] after temporarily changing the recalled data copies the new data to the VFO.

45