PRECAUTIONS
Please read all safety and operating instructions before using this transceiver. For best results, be aware of all warnings on the transceiver and follow these operating instructions. Retain these safety and operating instructions for future reference.
1Power Source
Connect this transceiver only to the power source described in the operating instructions or as marked on the transceiver itself.
2Power Cable Protection
Route all power cables safely. Ensure the power cables can neither be walked upon nor pinched by items placed near or against the cables. Pay particular attention to locations near AC receptacles, AC outlet strips and points of entry to the transceiver.
3Electrical Shocks
Take care not to drop objects or spill liquids into the transceiver through enclosure openings. Metal objects, such as hairpins or needles, inserted into the transceiver may contact voltages resulting in serious electrical shocks. Never permit children to insert any objects into this transceiver.
4Grounding and Polarization
Do not attempt to defeat methods used for grounding and electrical polarization in the transceiver, particularly involving the input power cable.
5Outdoor Antenna Grounding
Adequately ground all outdoor antennas used with this transceiver using approved methods. Grounding helps protect against voltage surges caused by lightning. It also reduces the chance of a
EXAMPLE OF ANTENNA GROUNDING
| ANTENNA | |
| LEAD IN | |
GROUND | WIRE | |
CLAMP | ANTENNA | |
| ||
| DISCHARGE UNIT | |
| GROUNDING | |
| CONDUCTORS | |
ELECTRIC SERVICE | GROUND CLAMPS | |
POWER SERVICE | ||
EQUIPMENT | ||
| GROUNDING ELECTRODE | |
| SYSTEM |
6Power Lines
Minimum recommended distance for an outdoor antenna from power lines is one and
7Ventilation
Locate the transceiver so as not to interfere with its ventilation. Do not place books or other equipment on the transceiver that may impede the free movement of air. Allow a minimum of 4 inches
(10cm) between the rear of the transceiver and the wall or operating desk shelf.
8Water and Moisture
Do not use the transceiver near water or sources of moisture. For example, avoid use near bathtubs, sinks, swimming pools, and in damp basements and attics.
9Abnormal Odors
The presence of an unusual odor or smoke is often a sign of trouble. Immediately turn the power OFF and remove the power cable. Contact a dealer or the nearest Service Center for advice.
10Heat
Locate the transceiver away from heat sources such as radiators, stoves, amplifiers or other devices that produce substantial amounts of heat.
11Cleaning
Do not use volatile solvents such as alcohol, paint thinner, gasoline or benzene to clean the cabinet. Use a clean cloth with warm water or a mild detergent.
12Periods of Inactivity
Disconnect the input power cable from the power source when the transceiver is not used for long periods of time.
13Servicing
Remove the transceiver’s enclosure only to do accessory installations described by this manual or accessory manuals. Follow provided instructions carefully to avoid electrical shocks. If unfamiliar with this type of work, seek assistance from an experienced individual, or have a professional technician do the task.
14Damage Requiring Service
Enlist the services of qualified personnel in the following cases:
a)The power supply or plug is damaged.
b)Objects have fallen or liquid has spilled into the transceiver.
c)The transceiver has been exposed to rain.
d)The transceiver is operating abnormally or performance has degraded seriously.
e)The transceiver has been dropped or the enclosure damaged.
iv