Getting started
■ Supplied accessories | ■ Installing batteries in the remote control | |
Check that you received all of the following parts. |
|
|
❏ Remote control | 1 | 3 |
❏ Batteries (2) (AAA, R03, |
|
|
❏ Optimizer microphone |
|
|
2
1 Take off the battery compartment cover.
2 Insert the two supplied batteries
(AAA, R03,
3 Snap the battery compartment cover back into place.
Notes
• Change all of the batteries if you notice that the operation range of the remote control decreases.
• Do not use an old battery and a new one together.
• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.
• If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
• Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
• If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries and set up the remote control code.
INTRODUCTION
English
3 En